Changing The Input Source - Samsung UN26EH4000 Quick Start Manual

Plug & Play
Set the Clock Mode.
5. Set the Clock Mode
Press ENTER
G
and select Auto or Manual, and then press ENTER
G
again.
If you selected Auto:
.... (c_loc_k_M_od_e _ _ _ _ _ _ :_A_uto _ _ _ _ _.,
1
The TV will automatically download the correct time from a digital channel.
, The DST (Daylight Savings Time) screen will appear. Press ENTER
G.
~
Select On if you want to turn the DST adjustment on and off manually.
G Enter
nD
Skip
Select Off to turn off the DST adjustment. Select Auto if you want the TV
to adjust to DST automatically. Press ENTER
G
when done.
The Time Zone screen will appear. Use
the,./T
button to select your
Time Zone, and then press ENTER
G.
If you selected Manual:
The Clock Set screen appears. Use the
•IT
buttons to change the
values in each field or use the number buttons to enter the values directly.
Use the
.._/~/buttons
to move from field to field. When done with all the
fields, press ENTER
G .
...v
6. View the HD Connection Guide
See the best way to connect a cable or satellite box for the highest quality HD pictures. Press the ENTER G button to
close the guide.
...v
8. Enjoy your Tv. ]
----------------
--------------------------------------~-
Press the
ENTER~
button.
~
To set or unset Store Demo mode outside of Plug
&
Play, press and release the Controller when the power is
on. The Function menu screen appears. Push the Controller to the left (to MENU
(liD))
and hold for more than 5
seconds. The Store Demo mode is set. To cancel Store Demo, bring up the Function menu using the Controller,
push the Controller to the right (to Source(£))) and hold for more than 5 seconds.
6. Changing the Input Source
Source List
When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch to your cable
box or STB satellite receiver, you need to change the Source.
1. Press the SOURCE button on your remote.
2. Use the
_.IT
buttons to select an external input source.
•rv
I
AV
I
Component
I
HDMI11DVII HDMI2
~
You can only choose external devices that are connected to the TV. In the Source List, connected inputs are
highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button when
the Source List is displayed The following selections appear under Edit Name:
•VCR
I
DVD
I
Cable STB
I
Satellite STB
I
PVR STB
I
AV Receiver
I
Game
I
Camcorder
I
PC
I
DVI PC
I
DVII TV
I
IPTV
I
Blu-ray
I
HD DVD
I
DMA: Select the name of the device connected to specific input jacks to make your input
source selection easier.
~
If you connect a PC to the HOM IIN 1 {DVI) port with an HOM I cable, assign PC to HOM I 1 in Edit Name.
~
If you connect a PC to the HDMIIN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to HDMI1 in Edit
Name.
~
If you connect an AV device to the HOM IIN 1 (DVI) port with an HOM I to DVI cable, assign DVI to HDMI1 in Edit
Name.
0
6
0