HALE UMC32+ User Manual page 10

UMC32+ DIY USB-MIDI User Manual
Two (2) UMC32+'s with 10 EXP8SC screw terminal boards for 64 channel inputs plus an additional 16 switches on the Aux inputs (8
from master, 8 from slave). This provides a total of 80 controls using a single bus powered USB connector. Linker board (in center)
connects the UMC's together. Using multiple processors (a dedicated processor for every 32 I/O's and 8 aux inputs) the UMC can
achieve a scan rate that is 2X faster than a single processor. It should be noted that the UMC that is connected to the USB bus is the
Master, while the linked UMC is the slave.
Firmware v3.1.0, Hardware v1.1, Datasheet: 03/20/2011 1:37 PM / © 2008-20011 Hale Microsystems LLC, http://www.halemicro.com
10