[Format] Ascii Esc; Hex 1B Decimal; [Range] [Description] N - Samsung SRP-350 Operator's Manual

[Name] Turn 90°clockwise rotation mode on/off.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Description] Turns 90°clockwise rotation mode on/off
n is used as follows:
n
0,48
1,49
ESC W xL xH yL yH dxL dxH dyL dyH
[Name] Set printing area in page mode
[Format] ASCII
dyH
Hex
dyH Decimal
dyH
[Range] 0 ≤ xL, xH, yL, yH, dxL, dxH, dyL, dyH ≤255(except dxL=dxH=0 or dyL
=dyH=0)
[Description] The horizontal starting position, vertical staring position, printing area
width, and printing area height are defined as x0, y0, dx (inch),
respectively.
x0 = [(xL + xH x 256)] x (horizontal motion unit)]
y0 = [(yL + yH x 256)] x (vertical motion unit)]
dx = [(dxL + dxH x 256)] x (horizontal motion unit)]
dy = [(dyL + dyH x 256)] x (horizontal motion unit)]
The printing area is set as shown in the figure below.
ESC \ nL nH
[Name] Set relative print position.
[Format] ASCII
Hex
Decimal
0 ≤ nL ≤ 255
[Range]
0 ≤ nH ≤ 255
[Description] Set the print starting position based on the current position by
using the horizontal or vertical motion unit.
This command sets the distance from the current position to
ESC a n
[Name] Select justification.
[Format] ASCII
Hex
Decimal
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] Aligns all the data in one line to the specified position.
n selects the type of justification as follows:
n Justification
ESC V n
1B 56 n
27 86 n
Function
Turn off 90°clockwise rotation mode
Turns on 90°clockwise rotation mode
ESC W xL
1B 57 xL
27 87 xL
ESC \ nL
1B 5C nL
27 92 nL
[(nL + nH × 256) x horizontal or vertical motion unit]
ESC a n
1B 61 n
27 97 n
xH yL yH dxL dxH
xH yL yH dxL dxH
xH yL yH dxL dxH
nH
nH
nH
dyL
dyL
dyL