RECOMMENDATIONS / PRECAUTIONS : MMT PILOTED MANUAL GEARBOX
Safety requirements
ESSENTIAL : Given the special features of the MMT piloted manual gearbox, observe the
requirements detailed below.
IMPERATIVE : Always disconnect the battery negative terminal before operating on the
actuators (*).
NOTE : (*) After disconnecting the battery, never try to remove the clutch actuator on the
vehicle before having checked that it is in the closed position (rod pushed in).
IMPERATIVE : After Sales checks done with the engine running must be performed with
«Neutral» engaged and the handbrake on (unless there is a clear mention otherwise in the
repair procedures)
IMPERATIVE : The area of movement of the clutch fork must always be kept free during the
actuator operating phases.
IMPERATIVE : When initialising the clutch actuator and/or gearbox actuator, do not allow
any person to walk or stand in front of the vehicle.
WARNING : When the engine is running, it is forbidden to perform repairs on the clutch and
gearbox actuators on the vehicle (whether manually or using a diagnostic tool).
B2C201SD
137