Kia Automobile User Manual page 46

Knowing your vehicle
1
2
3
4
2. Insert the tongue plate (A) into the
5
open end of the buckle (C) until an
audible "click" is heard, indicating
the latch is locked. Make sure the
6
belt is not twisted.
7
8
9
3 36
1LDN3208A
3. Pull the tongue plate (B) and
insert the tongue plate into the
open end of the buckle (D) until an
audible "click" is heard, indicating
the latch is locked. Make sure the
belt is not twisted.
There will be an audible "click" when
the tab locks in the buckle. The seat
belt automatically adjusts to the
proper length only after the lap belt is
adjusted manually so that it fits snug-
ly around your hips, if you lean for-
ward in a slow, easy motion, the belt
will extend and let you move around.
If there is a sudden stop or impact,
the belt will lock into position. It will
also lock if you try to lean forward too
quickly.
1LDN3209
WARNING
When using the rear seat center
belt, you must lock all tongue
plates and buckle/anchor con-
nector. If any tongue plate or
buckle/anchor connector is not
locked, it will increase the
chance of injury or death in the
event of collision.