Remote Control - Honeywell CL30XC Owner's Manual

REMOTE CONTROL

Power: On / Off
Speed: Low / Medium / High
Cool/Fan: Controls cooling or fan option
Swing/Ionizer: Controls the motion of the louvers&turns
On / Off the Ionizer function.
Timer: Controls timer function for automatic shut off
Sleep : Turns on the sleep mode(Cooler runs on high
speed for 1 hr followed by medium speed for
1 hr and then remains in low speed)
Remote Control ( Batteries not included)
NOTE
•
Please open the battery compartment at the back of the
remote control and insert two new AAA dry cell batteries.
Care must be taken to insert the batteries according to the
correct polarity (+ / –) markings shown inside the battery
compartment.
•
Always point the remote control signal transmitter towards
the unit when operating.
•
Make sure that the signal path is not obstructed.
•
Remove the batteries if the unit is not going to be used for
an extended period of time.
•
Do not drop the remote control.
USE & OPERATION
POWER
SWING
SPEED
IONIZER
TIMER
COOL SLEEP
13