Related Manuals for Pope 101PLT25FC
Summary of Contents for Pope 101PLT25FC
- Page 1 Renegade 26cc Line Trimmer Model Numbers: 101PLT25FC 101PLT25FCB Operator’s Manual WARNING To reduce the risk of injury, the user must read and understand the Operator’s Manual. Save this manual.
- Page 3 We would like you to be completely satisfi ed with your new product, so feel free to contact an authorised service dealer for help with service, genuine Pope parts or other information you may require. Or phone the Pope Customer Service Centre for details of your nearest dealer on 1300 134 880.
-
Page 4: Table Of Contents
Contents Safety Rules ......................... Symbols ........................Specifi cations ......................Applications ......................... Features ......................... Unpacking ........................Assembly ........................Attaching the Upper Shaft with Engine to the Lower Bent Shaft Cutting Head Attaching the Front Handle Attaching the Grass Defl ector Shield Fitting the Carry Strap Operations ........................ -
Page 5: Safety Rules
Safety Rules WARNING Read and understand all instructions. Failure to follow all instructions may result in serious personal injury as well as damage to product. • Physical Conditions of the Operator. Do not • Fuelling. Mix and pour fuel outdoors where there operate this product when tired, ill or under the are no sparks or fl... -
Page 6: Symbols
Keep all bystanders, especially children and pets, at least 15 metres from the operating area. No Blade Do not install any type of blade on Model No. 101PLT25FC. Use only fl exible, non-metallic line recommended by the manufacturer. Read Operator’s Read the Operator’s Manual before starting or operating... -
Page 7: Specifi Cations
Specifi cations Model Numbers: 101PLT25FC Engine: 26cc Full Crank 101PLT25FCB Cutting Diameter: 400 mm Line Size: 2.00 mm Weight (Dry): 5.1 kg Fuel Tank Capacity: 0.5 Litres Fuel Petrol/Oil Mix: 25:1 1. Line Trimmer Cutting Head 2. Cutting Line 3. Grass Defl ector Shield 4. -
Page 8: Applications
Applications Use this product for the following applications: • Cutting grass, weeds and light undergrowth • Edging along sideways and driveways • Do not attempt to use this product as a drive unit for other work tools or tool kits of any kind. Features WARNING: Exercise caution when using the product. -
Page 9: Unpacking
If any parts are missing, do not operate the product until the missing parts are replaced. Failure to do so could result in serious personal injury. Packing List Renegade 26cc Line Trimmer Model Numbers: 101PLT25FC 101PLT25FCB • Upper Shaft •... -
Page 10: Assembly
Assembly Attaching the Upper Shaft with Engine Attaching the Front Handle to the Lower Bent Shaft Cutting Head See Fig. 4, 5 and 6 See Fig, 1, 2 and 3 Follow these steps to attach the two shafts together. Follow these steps to attach the front handle. The lower bent shaft connects to the upper shaft with Loosen the wing nut on the fastening screw on the engine by means of a coupler. -
Page 11: Attaching The Grass Defl Ector Shield
Assembly Attaching the Grass Defl ector Shield Fitting the Carry Strap See Figs. 7, 8 and 9 See Fig. 10 Follow these steps to fi t the carry strap. Follow these steps to attach the Grass Defl ector Shield. The carry strap is intended to help you work safely and ergonomically with your trimmer. -
Page 12: Operations
Operation Before you start the Trimmer Follow these steps to mix the fuel. Setting your cutting height Use an approved mixing container for mixing fuel. Mix the 2 stroke engine oil with unleaded petrol Slip the carry strap over the left shoulder. in the container provided at the rate of 25 parts Set the length of the carry strap in such a way petrol to 1 part oil. -
Page 13: Starting The Engine
Operation - continued Starting the Engine Starting the product depends on whether the engine is Since the throttle has been secured in the open cold or warm. position the cutting head will start to rotate. To release the throttle simply operate the throttle and then by releasing it the throttle will return to idle. -
Page 14: Operating The Engine
Operation - continued Operating the Trimmer Prolonged cutting at partial throttle will result in oil dripping from the muffl er. BEFORE EACH USE: Cutting Tips • Remove dirt and debris from the product exterior. • Inspect the engine, tank and hoses for possible Keep the trimmer tilted toward the area being cut;... -
Page 15: To Advance The Cutting Line
Maintenance, replacement or repair of the emission control device and systems may be performed by any The cutting line is advanced by tapping the cutting head recognised Toro or Pope Service Centre. on grass while running the engine at full throttle. Run engine at full throttle. -
Page 16: Replacing And Cleaning The Air Filter
Maintenance - continued Replacing and Cleaning the Air Filter Replacing the Cutting Line See Fig. 14, 15, 16 and 17. Stop the engine. Remove the spark plug boot from the spark plug. Follow these steps to replace the cutting line Remove the air cleaner cover (Fig. -
Page 17: To Store The Product Long Term
Maintenance - continued Replacing the Cutting Line To Store the Product Long Term (more than 30 days) Fig. 14 f you do not intend to use the product for more than one month, follow these steps to store the product long term. -
Page 18: Troubleshooting
Troubleshooting Problem Possible Cause Solution Engine will not start Switch set to OFF Set switch to the ON position. position. Remove the spark plug. Re-attach the spark No spark. plug and lay the spark plug on the metal cylinder. No fuel. Pull the starter cord and watch for a spark at the Flooded engine. -
Page 19: Warranty
Instructions for obtaining Warranty Service Any part of the Pope product found in the judgement of Toro Australia Pty Ltd to be defective in material or workmanship will be replaced by an Authorised Service Dealer for this product without charge for parts or labour.
Need help?
Do you have a question about the 101PLT25FC and is the answer not in the manual?
Questions and answers