Hide thumbs Also See for 460MSBS:

Advertisement

460MSBS Gateway
User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 460MSBS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RTA 460MSBS

  • Page 1 460MSBS Gateway User Guide...
  • Page 2: Limited Warranty

    The software (a) was developed at private expense, is existing computer software, and was not developed with government funds; (b) is a trade secret of Real Time Automation, Inc. for all purposes of the Freedom of Information Act; (c) is “restricted computer software” submitted with restricted rights in accordance with subparagraphs (a) through (d) of the Commercial “Computer Soft-...
  • Page 3 The 460MSBS Gateway device seamlessly connects a Modbus TCP Client device to a BACnet/IP enabled automation system. By following this guide, you will be able to configure the 460MSBS Gateway for basic operation. You will set the device’s network settings and parameters to the proper configuration for initial operation and physically place the device in the network.
  • Page 4: Required Tools And Data

    460 Gateway Device Line 460MSBS Required Tools and Data You will need the following tools: The 460MSBS Gateway ♦ The provided CD-ROM ♦ A Working PC (Windows based) ♦ The Supplied Ethernet Crossover Cable ♦ A 7-30 VDC power source (T-strip) ♦...
  • Page 5: Port Connections

    If these default port are not compatible with your equipment they can be configured differently. For specific jumper settings refer to the end of this manual, appendix A. For assistance changing port configurations contact our customer support department. Real Time Automation, Inc. 1-800-249-1612...
  • Page 6: Accessing The Main Page

    Browser configuration is only Internet IP Address for the gateway would be 192.168.0.100. Explorer compatible. The use of 6) Click Set. FireFox is not supported. 7) Click Launch Webpage. The main page should appear. Default IP address is 192.168.0.100 Real Time Automation, Inc. 1-800-249-1612...
  • Page 7: Error: Main Page Does Not Launch

    The (###.###.#.###) is a placeholder for the IP Address you used in step 5 of network configuration which, is 192.168.0.100 by default. If the device is connected to the network the ping will show a response. If you get no response check the crossover cable. Real Time Automation, Inc. 1-800-249-1612...
  • Page 8 460 Gateway Device Line 460MSBS Modbus TCP Device Settings The Modbus TCP Server has no configurable settings. Real Time Automation, Inc. 1-800-249-1612...
  • Page 9 1) Scroll down to the BACnet Server row and click Edit. Verify that the Enabled box is checked. 2) Enter a unique Device Instance that will represent the 460MSBS on the BACnet/IP network. 3) In the Device Name field enter a unique name for the device.
  • Page 10: Application Parameters

    1) Next to Application Parameters click Edit. 2) The 460MSBS has two ways that the data can be reference within Modbus. The Modbus data can be represented as integer (2 bytes) or as a float (4 bytes). The other option, only valid for float data type selected, is what type of word ordering the Modbus device is expecting.
  • Page 11 1) On the Main Page click on the Status and Summary button located on the left hand side of the screen 2) The 460MSBS Device Summary and Status page will be shown. 3) The device drop down menu allows you to switch between the different devices and display their status.
  • Page 12 460 Gateway Device Line 460MSBS Validating Gateway Communication If the Timeout counter or the Error counter are incrementing or a status of Enabled Not Connected, refer to the Troubleshooting Tops to help get the device up and running. Real Time Automation, Inc. 1-800-249-1612...
  • Page 13: Configuring Multiple Devices

    7) Repeat the network configuration section to connect the next device. 8) Once you launch the webpage click the Utilities button. 9) Click Browse… within the Save and Restore 460MSBS Configuration section and browse to the file you saved. 10) Click Open.
  • Page 14: Completing The Installation

    Completing the Installation Now that the 460MSBS gateway is configured properly you must place the device in the network. The following instructions will tell you how to take the device from the configuration area to the shop floor or other operating environment.
  • Page 15: Jumper Configurations

    Only one RS232, RS485, or CAN port setting can be active at a time for each unit. For example, a unit cannot have two ports set for RS232 or two ports set for CAN. NC=No connection Port 0 (T-Strip) RS485 & PWR 1 Pin Setting Port 1 (DB-9) RS232 Pin Setting Real Time Automation, Inc. 1-800-249-1612...
  • Page 16 Port 0 (T-Strip) CAN Pin Setting CANL SHIELD CANH PWR Port 1 (DB-9) RS485 Pin Setting NC= No connection Port 0 (T-Strip) CAN Pin Setting CANL SHIELD CANH PWR Port 1 (DB-9) RS232 Pin Setting Real Time Automation, Inc. 1-800-249-1612...
  • Page 17 Real Time Automation, Inc. 150 South Sunny Slope Road Suite 130 Brookfield WI 53005 Toll free 1-800-249-1612 Local (262) 439-4999...

Table of Contents