Advertisement
Connection
This series of fixtures based on three led's board, has now a built-in RJ45 female connector
This solution allows the user to get an easier, faster and safer connection.
Connect the projectors to the power unit with standard CAT.5 UTP STRAIGHT PATCH CABLE, and special HUB RJ45.
Example with three fixtures: (3 fixtures, 1 led power, 2 Hub RJ45, 5 UTP straight patch cable)
ATTENTION!!!
Don't plug in or out the connector from the fixture or from the led power when is connected to the main
power. This non-observance will damage permanently the fixtures and the led power.
Cable wiring
568B SPECIFICATION – CABLE MANUFACTURING INSTRUCTION
PIN ORDER OF THE PLUG
3
Advertisement
