Advertisement
BEFORE CONNECTING AND USING THE PROJECTOR, IT IS IMPORTANT TO READ CAREFULLY ALL THE
INSTRUCTIONS IN THIS MANUAL.
QUALIFIED PERSONNEL ONLY, IN COMPLIANCE WITH ALL THE SECURITY LAWS, CAN DO THE
INSTALLATION, THE MAINTENANCE AND THE UTILISATION OF THIS PROJECTOR.
BEFORE CONNECTING THE PROJECTOR, MAKE SURE THAT THE FREQUENCY AND THE VOLTAGE
VALUES ARE SUITABLE AS SPECIFIED ON THE PROJECTOR.
FOR ANY DOUBT, CONTACT YOUR SUPPLIER OR SEND AN E-MAIL TO:
LED RADIATION, DO NOT STARE INTO BEAM, CLASS 2 LED PER IEC 60825-1.
For additional information on these led devices with regard to the IEC 60825-1 standard, contact CREE.
Index
Dimensions and weight ---------------------------------------------------------------------------------- page 2
Technical data --------------------------------------------------------------------------------------------- page 2
Storage ------------------------------------------------------------------------------------------------------ page 2
Admissible environmental conditions ----------------------------------------------------------------- page 2
Installation ------------------------------------------------------------------------------------------------- page 2
Connection -------------------------------------------------------------------------------------------------- page 3
Cable wiring ------------------------------------------------------------------------------------------------ page 3
Optical specifications ------------------------------------------------------------------------------------- page 4
Lenses -------------------------------------------------------------------------------------------------------- page 4
Power supply ---------------------------------------------------------------------------------------------- page 4
Spare parts ------------------------------------------------------------------------------------------------- page 4
tech@lamposrl.it
SOLID: Protected against solid object greater than 1mm
WATER: Not protected
Suitable for direct mounting on normally flammable surfaces
Minimum distance from lighted objects (0.3 meters)
Rated maximum ambient temperature (indoor with ventilation)
Replace any cracked protective shield or lenses
1
Advertisement
