Related Manuals for Tevion AC-HTB91
Summary of Contents for Tevion AC-HTB91
- Page 1 HD Set Top Box Instruction Manual • Model Number AC-HTB91 After Sales Support TEL: 1300 886 649 N13275...
-
Page 2: What Your 1 Year Warranty Means
HD Set Top Box What your year warranty means Great care has gone into the manufacture of this product and it should therefore provide you with years of good service when used properly. In the event of product failure within its intended use over the course of the first year after the date of purchase, we will remedy the problem as quickly as possible once it has been brought to our attention. -
Page 3: Table Of Contents
Content 3 Welcome section 4 Important safety instructions 6 Preface and features 7 Safety 7 General operation of the receiver 8 Front panel 8 Rear panel 9 Remote control unit key layout and functions 10 Battery safety precautions 11 Preparing the remote control for use 11 Remote control operating distance &... -
Page 4: Welcome Section
Welcome Section Congratulations on choosing to buy a TEVION product. ® All products brought to you by TEVION are manufactured to the highest ® standards of performance and safety, and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive Year Warranty. -
Page 5: Important Safety Instructions
Important Safety Instructions When using electrical appliances, basic safety precautions should always be followed, including the following: • Carefully read this instruction manual before using this appliance. • Keep this appliance out of reach of young children. • Children should be supervised to ensure that they do not play with the appliance. - Page 6 • Do not operate appliance underneath or near flammable or combustible materials (e.g. curtains). Keep at least 300mm clearance around sides, back, front and top. • Unplug this apparatus during lightning storms or when unused for long periods of time. •...
-
Page 7: Preface And Features
7 day Electronic Program Guides. Optical Digital Audio can provide full surround sound. Closed Caption Subtitle and Teletext functions are embedded in the receiver. Equipped with a proven SGS Thomson main chip, the AC-HTB91 delivers beautiful High Definition and Standard Definition Television pictures. -
Page 8: Safety
Safety 1 Allow clear space around the receiver to provide sufficient ventilation. 2 Do not cover the receiver’s ventilation slots or place it near a heat source. 3 Use a soft cloth and mild washing solution to clean the case. 4 Do not connect or change cables when the receiver is-plugged in. -
Page 9: Front Panel
Front panel 1. STANDBY key - Switches between Operational and Standby modes. 2. Numerical LED display - Shows channel selected, Load status etc. Power LED, green - Indicates power supply active. Signal Lock LED, orange - No Light = No Signal = No Pictures and Sound. 3 &... -
Page 10: Remote Control Unit Key Layout And Functions
Remote control unit key layout and functions • Standby switch between Standby and Operational. • MENU. Show Main Menu. • MUTE. Mute audio. • FAV. Shows Favorite channel list. • EPG. Show [Electronic Program Guide]. • 0-9. Select channels by numbers. •... -
Page 11: Battery Safety Precautions
Battery safety precautions The following Battery Safety precautions can save your RCU from damage from improper use of or poor quality batteries. 1. Double check that polarities of battery and RCU terminals correspond. 2. If storing your receiver for weeks or longer, remove the batteries from the RCU. 3. -
Page 12: Preparing The Remote Control For Use
Preparing the remote control for use Fresh batteries must be loaded for your Remote Control Unit to operate reliably. 1. Open the battery compartment lid on the back of the RCU. 2. Insert the batteries, negative terminals first. Take care that battery polarity markings correspond with those of the Remote Control. -
Page 13: Setting Up
Setting up Your High Definition Receiver comes with a selection of Video and Audio outputs. The outputs you use will be determined by the inputs available on your TV monitor and/or HI-FI equipment. This receiver delivers excellent picture and sound quality from High Definition and Standard Definition broadcasts. - Page 14 1. Basic set up- composite video Uses the single Yellow RCA Video connector for Composite Video (CVBS) with the Red and White RCA AUDIO R & L connectors at the back of your receiver. All video outputs are active. 1. 1. Prepare your equipment Ensure that the power leads to both the TV monitor and the Set Top Box are unplugged whilst making AV connections.
- Page 15 2. BASIC SET UP - COMPONENT VIDEO (Green Blue Red) For a basic component connection, use the Red Blue Green video and the Red White audio connectors on the back of the receiver. The RCA leads included with your receiver can assist. All video outputs are active simultaneously.
- Page 16 Audio c) Connect a 2 wire RCA lead to the Red and White AUDIO L&R output connectors on the rear of the set top box. d) Connect the other end of the cable to corresponding the audio input connectors on your television or monitor. e) Digital Audio for an external decoder is available from the Toslink Audio Optical Digital terminal.
- Page 17 Video and Audio share the one HDMI cable You are now ready for GETTING STARTED. After Sales Support TEL: 1300 886 649...
-
Page 18: Getting Started
Getting started 1. Select the most suitable display or TV connection method. 2. Connect a functional TV Antenna to your digital receiver. 3. Turn on your monitor or TV. 4. Turn on your receiver. 5. Select the appropriate Input on your monitor or television and connect. 6. -
Page 19: Scan
Scan Auto scan 1. Press the Menu key, the “Main Menu” will show. 2. Use the UP/DOWN keys to scroll to the “Scan” sub- menu. 3. Press the OK key to activate. Default option is “Auto”. 4. Press the UP/DOWN keys to select “Start” and press the OK to commence “Auto Scan”. -
Page 20: Manual Scan
Manual scan 1. Select the channel to scan (unless you know the centre freq.) 2. Press Menu key, the “Main Menu” will show. 3. Use the UP/DOWN keys to scroll to “Scan”. 4. Press the OK key to activate “Scan” sub- menu. -
Page 21: Settings
Settings Default Input Pin is 0000 AV Setting • Screen Ratio. You can set your receiver screen shape to match your display or TV. Select 4:3 (normal) or 16:9 (wide) by using the -/+ keys. • 4:3 is the aspect ratio for conventional Analog TV screens;... - Page 22 5. Use the UP/DOWN keys to select “Parental Lock”. 6. Using the -/+ key make a selection. 7. Press EXIT, EXIT to automatically save your change and to return to “MAIN MENU”. 8. When a program carries a rating equivalent to or greater than the Parental Lock level selected the program will be blocked and the “PIN code”...
-
Page 23: Factory Reset
Factory Reset Factory Reset returns the receiver to its default settings. 1. From the “MAIN MENU” select the “Settings” sub menu option and press the OK key. 2. “Input PIN” dialogue box displays. Enter PIN to access the next menu level. 3. - Page 24 Delete 1. Use the UP/DOWN keys on the remote to highlight channels to delete. 2. Press the “Red” key and dialogue box will ask you to confirm. 3. Press OK when “YES” is highlighted to complete channel deletion. *To recover deleted channels you must Re-Scan. Favorites 1.
-
Page 25: System Information
System information This shows the Firmware Version etc. of the receiver. Other features • Closed Captions Closed Captions can be switched on at any time by pressing the Blue key on the Remote Control Unit. Pressing the Blue key again turns Closed Captions Off. •... -
Page 26: Extended Information - Now&Next
Extended information - Now & Next • NOW Press the INFO key on the remote to activate the basic information plate (picture 1). For more detailed information about this program, press the OK key while the basic information plate is displayed (picture 2). •... -
Page 27: Day Electronic Program Guide
7-Day electronic program guide 1. A comprehensive Electronic Program Guide (EPG) is transmitted by most broadcasters with details of Program Names, Times and Descriptions that can exceed more than 7 days in advance. (picture 1) 2. You can access the EPG by pressing the EPG key on the Remote Control Unit. (picture 1) 3. -
Page 28: Audio Mode Selection
Audio mode selection Using the Audio Control menu: 1. Press the AUDIO key on the remote control, with your receiver in normal mode The AUDIO CONTROL menu displays. 2. Press the UP/DOWN keys to select from TRACK, and OUTPUT. MULAUDIO describes the Audio of the presently tuned channel. -
Page 29: Troubleshooting
Troubleshooting Check your receiver with the suggestions below. PROBLEM SUGGESTION No Power Check the power cord is plugged in - at both ends. No Reception Check operational antenna cable is properly connected. Receiver not responding to Check Remote Control batteries and battery contacts. the Remote Control Unit. -
Page 30: Specifications
Specifications • Decodes High Definition and Standard Definition Digital Terrestrial TV & radio. • Video Outputs HDMI, Component Y Pb Pr and Composite CVBS. • Video Resolutions 1920x1080i, 1280x720p or 720x576p. • Aspect Ratios Widescreen 16:9, Centre Cut 4:3 or Letterbox 4:3. •... - Page 31 NOTE: After Sales Support TEL: 1300 886 649...