Adding Pauses Or Waits; Sending A Name Card; Finding A Contact - Samsung Brightside User Manual

Adding Pauses or Waits

Calls to automated systems can require entry of a password or
account number. You can store the numbers to a Contacts entry,
along with special pause and wait characters.
From a Home screen, touch
1.
Touch a contact, then touch Edit.
2.
While entering a phone number in a contact entry, enter
3.
the phone number up to the pause or wait, then touch
.
Insert Insert nser
Touch an option:
4.
• Add 2-Sec Pause: Stops the dialing sequence for two
seconds, then automatically sends the remaining digits.
A "p" appears in the telephone number.
• Add Wait: Stops the dialing sequence, waiting for further
input from you. A "w" appears in the telephone number.
After your entry, touch
5.
Note: Entering multiple pauses extends the length of a pause. For example,
two consecutive pauses equal a total pause of four seconds.
Remember that each pause counts as a digit towards the 48-digit
maximum for telephone numbers.
35
Contacts.
to save the contact entry.
Done

Sending a Name Card

From a Home screen, touch
1.
Touch a contact, then touch SEND NAME CARD.
2.
Select a sending method:
3.
• Send via Bluetooth: Sends the name card to a selected device.
• Send via Message: Sends the name card in a message.
Touch Send to send the name card.
4.

Finding a Contact

Finding a contact in landscape mode
From a Home screen, touch
1.
The cursor appears in the Search field. Enter part or all of
2.
the Contact name to see matching entries.
Tip: You can also find a Contact with Device Search. For more information,
see "Phone Search" on page 94.
Contacts.
Contacts.