Adding Pauses or Waits
Calls to automated systems can require you to enter
numbers to navigate menus, or to enter a password or
account number. You can store phone numbers with
special pause or wait characters to make entering
these numbers easier.
1. From the Home screen, press the
key (Contacts).
2. Create a new contact or edit an existing contact.
3. Enter the phone number up to the pause or wait,
then press the
select an option:
•
Add 2-Sec Pause: Stops the dialing sequence
for two seconds, then automatically dials the
remaining digits. A "P" appears in the ield to
indicate the pause.
•
Add Wait: Stops the dialing sequence, waiting
for input from you. A "W" appears in the ield to
indicate the wait.
4. When inished, press
Main Menu
Right Soft
Right Soft key (Options) to
SAVE.
FOR INTERNAL USE ONLY
Note: Entering multiple pauses extends the length of a
pause, and each pause counts as a digit. For example,
two consecutive pauses create a total pause of four
seconds, and count as two digits.
Finding Contacts
1. From the Home screen, press the
key (Contacts). The Contact List displays, with the
cursor in the Go To ield.
2. In the Go To ield, enter the irst few characters of
the Contact name to see matching entries.
3. Use the
contact, then use these options:
•
Press the
•
Press
•
Press the
contact entry.
•
Press the
contacts options.
DRAFT
51
Directional keys to highlight a
Send key to call the contact.
VIEW to open the contact entry.
Left Soft key (Edit) to edit the
Right Soft key (Options) for
Right Soft
Contacts