Table of Contents
Advertisement
Turning Your Phone On and Off
Turning Your Phone On
To turn your phone on:
Press and release
on your wireless phone.
Once your phone is on, the Phone Display screen may display a
"Searching" screen, which indicates your phone is searching the
network for a signal. When your phone does find a signal, it
automatically enters standby mode – the phone's idle state. At this
point, you are ready to begin making and receiving calls.
Note:
By default the phone will power-up on the Phone Display Screen.
You can change the default power-up side through
Settings > Display > Power On Side
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. When a signal is found,
your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically
without your intervention. You can also initiate a search for service by
pressing any key (when your phone is turned on).
Note:
The Power Save feature helps to conserve your battery power when
you are in an area where there is no signal.
Turning Your Phone Off
To turn your phone off:
Press and hold
for two seconds, or until you see the
powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the battery is
charging).
Section 2A: Phone Basics
Menu >
.
19
Note:
If your MP3 Player Side Main LCD is active, press the FLIP side
button to switch over to the keypad side to use
the phone.
Locking the Phone
The Lock button allows you to lock both the phone's keypad and
Navigation Pad.
To quickly lock the phone:
Slide the Lock button (seen below) in the direction of the
arrow to lock the phone's keypad and Navigation Pad. When
the phone is locked, both the Main LCD and Phone Display
Screen work identically. Locking the phone in this manner
activates the power save mode. All incoming calls are still
received, any assigned ring tones will begin playing, and
Caller ID information will be displayed on the last active
screen.
Note:
When the phone is locked, press the Volume key to view the Time
and Date on the last used screen. Locking the phone reduces
battery consumption, extends phone usage, and prevents
inadvertent dialing.
Lock Button
Seeing the RED background
indicates the phone is locked.
20
to turn off
Section 2A: Phone Basics
Advertisement
Table of Contents
