Changing The Input Source; Configuring The Basic Settings In Initial Setup; Installing The Batteries Into The Remote; How To Use Edit Name - Samsung PN43F4500 User Manual

Installing batteries (Battery size: AAA)
Source
When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or
switch to your cable box or STB satellite receiver, you need to change the Source.
1. Press the
SOURCE
2. Select a desired external input source.
■ TV / HDMI1 / HDMI2/DVI / AV / Component
✎
You can only choose external devices that are connected to the TV. In the Source list, connected
inputs are highlighted.

How to Use Edit Name

Edit Name lets you associate a device name to an input source, for example, Blu-ray to HDMI 1 To access Edit Name,
press the button when the Source list is displayed. The following selections appear under Edit Name:
TOOLS
VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV
/ Blu-ray / HD DVD / DMA
Select the name of the device connected to each input jack to make your input source selection easier. When you view
the Source list,the device name and the input jack will be displayed together.
✎
If you have connected a PC to the
device name.
✎ If you have connected a PC to the
to enter a device name.
✎
If you connected an AV device to the
Edit Name to enter a device name.
Information (in the Edit Name function)
Displays detailed information about the connected external device.
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring
the TV's basic settings. Plug the power cord into a wall outlet, and then press the
Configure your TV's basic settings in the initial setup by following the instructions on your TV's screen.
✎
Setup is available only when the Source is set to TV.
✎
If you are not using a cable box or satellite box, make you sure have connected the TV to an antenna or cable
connection before you turn on the TV.
If You Want to Re-run Setup...
O
→ System → Setup → ENTERE
MENU
[PH4500-5000-ZA]BN68-05661A-00ENG.indb 9

Installing the Batteries Into the Remote

✎

Changing the Input Source

button on your remote.
HDMI IN 2(DVI)
HDMI IN 2(DVI)
HDMI IN 2(DVI)

Configuring the Basic Settings in Initial Setup

NOTE
• Install the batteries so that the polarity of the batteries (+/-)
matches the illustration in the battery compartment.
• Use the remote control within 23 feet of the TV.
• Bright light may affect the performance of the remote
control. Avoid using when near fluorescent lights or neon
signs.
• The color and shape may vary depending on the model.
port with an HDMI cable, select PC under Edit Name to enter a
port with an HDMI to DVI cable, select DVI PC under Edit Name
port with an HDMI to DVI cable, select DVI Devices under
POWER
English - 9
button to turn on the TV.
2014-01-03 10:30:44