Controls And Connectors - Sony HDC1500R Operation Manual

j LENS connector (12-pin)
Connect the lens cable. The camera can control the lens
functions through this cable.
k Tripod mount
Attach the VCT-14 Tripod Adaptor when mounting the
camera on a tripod.

Controls and Connectors

Front right
a INCOM button
b RET 1 button
c Assignable switch
d Filter select buttons
e FILTER LOCAL button
f AUTO W/B BAL switch
a INCOM (intercom 1) button
The intercom 1 microphone is turned ON while this button
is held pressed.
You can also assign other functions to this button, using the
menu displayed on the viewfinder screen.
b RET 1 (return video 1) button
The return video 1 signal from the camera control unit is
monitored on the viewfinder screen while this button is
pressed. It function the same as the RET 1 button on the
side (page 15) and that on the operation panel on the rear
of the camera (page 17 or 18).
l Shoulder pad
You can adjust the position so that you can get the best
balance for shooting with the camera on your shoulder.
For details, see "Adjusting the Shoulder Pad Position" on
page 24.
H D
MU LT I FO RM
AT SE RI ES
You can also assign other functions to this button, using the
menu displayed on the viewfinder screen.
c Assignable switch
You can assign a function using the menu displayed on the
viewfinder screen.
d Filter select buttons
HDC1500R/1550R
You can switch the built-in ND and CC (color temperature
conversion) filters by pressing the selectors while holding
the FILTER LOCAL button depressed.
g GAIN switch
h OUTPUT/AUTO KNEE switch
i WHITE BAL switch
j DISPLAY switch
k CANCEL/STATUS switch
l "Memory Stick" section
m MENU SEL knob/ENTER
button
Locations and Functions of Parts
13