32-1163.fm Page 23 Monday, August 9, 1999 3:07 PM
CASSETTE DECK OPERATION
You can play a cassette tape in either
cassette deck, and you can record tapes
in TAPE 1.
Note: You cannot operate the cassette
deck using the remote control.
LOADING A TAPE
1. Take up any slack in the tape by
turning the cassette's hub with a
pencil or your finger. If you do not
remove excess slack, the tape might
become tangled in the record/play-
back mechanism. Avoid touching
the tape.
2. Press
STOP/EJECT
the cassette compartment.
3. Load the cassette tape with its open
edge facing down, the side you want
to play or record on facing out, and
the full reel to the left.
4. Close the compartment door.
PLAYING A TAPE
You can play a cassette tape in either
TAPE 1 or TAPE 2, or you can load cas-
sette tapes in both decks and play one
side of each consecutively.
Warning: To protect your hearing, set
MASTER VOLUME
play a cassette tape.
to open
Normal Play
Follow these steps to play a cassette
tape in TAPE 1 or TAPE 2.
1. Load a cassette tape in TAPE 1 or
TAPE 2.
2. Press
on the system. The
indicator turns off.
to
before you
MIN
(if necessary) to turn
POWER
standby
POWER
23