NordicTrack NTL17008.0 User Manual

NordicTrack NTL17008.0 User Manual

Reflex tr

Advertisement

www.nordictrack.com
Model No. NTL17008.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number Decal
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: You must note the
product model number and serial
number (see the drawing above)
before contacting us:
1-888-825-2588
CALL TOLL-FREE:
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NTL17008.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for NordicTrack NTL17008.0

  • Page 1 USER'S MANUAL Model No. NTL17008.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
  • Page 2: Table Of Contents

    Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. NordicTrack is a registered trademark of ICON IP, Inc.
  • Page 3: Important Precautions

    2. It is the responsibility of the owner to ensure page 13. To purchase a surge suppressor, see that all users of this treadmill are adequately your local NordicTrack dealer or call the tele- informed of all warnings and precautions. phone number on the front cover of this man- ual and order part number 146148, or see your 3.
  • Page 4 20. Never leave the treadmill unattended while it 28. The treadmill is intended for in-home use is running. Always remove the key, unplug the only. Do not use the treadmill in any commer- power cord, and switch the reset/off circuit cial, rental, or institutional setting.
  • Page 5 34. Upon completion of any service or repairs to • Use a jumper wire not smaller than No. 6 the treadmill or the television, ask the service AWG (13.3 mm ) copper, or the equivalent technician to perform safety checks to con- when a separate antenna-grounding elec- firm that the unit is in proper operating condi- trode is used.
  • Page 6: Before You Begin

    BEFORE YOU BEGIN Thank you for selecting the revolutionary NordicTrack ing this manual, please see the front cover of this man- ® REFLEX TR treadmill. The REFLEX TR treadmill of- ual. To help us assist you, note the product model fers an impressive selection of features designed to number and serial number before contacting us.
  • Page 7: Assembly

    ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton.
  • Page 8 1. With the help of a second person, tip the Uprights (43) down as shown. Attach the four Base Feet (96) to the bottom of the Uprights (43) with four #8 x 1" Tek Screws (1) in the locations shown. 2.
  • Page 9 3. Insert the excess wire into the Uprights (43) as you set the console assembly on the Uprights. Console Be careful not to pinch any wires. Assembly Attach the console assembly with four 3/8" x 1 1/4" Bolts (2) and four 3/8" Star Washers (4). Start all four Bolts before tightening any of them.
  • Page 10 5. Place the treadmill in the storage position and make sure that the latch pin is engaged as de- scribed on page 27. Position the Base Plate (97) on the treadmill as shown. Attach the Base Plate to the Uprights (43) with three 3/8"...
  • Page 11 If you purchase the optional chest pulse sensor (see page 26), follow the steps below to install the re- ceiver included with the chest pulse sensor. 1. Make sure that the power cord is unplugged. Remove the indicated #8 x 1/2" Screws (44) from the Accessory Cover (122) on the back of the console assembly.
  • Page 12 Before operating the television, you must connect an antenna or a 75 ohm CATV cable to the 75 ohm ter- minal or the 96" A/V Wire to the audio/video input jacks. Note: Use a CATV cable to connect to an external source such as a cable box, satellite TV box, VCR, or analog cable.
  • Page 13: Operation And Adjustment

    Grounded Outlet Box the right). To purchase a surge suppressor, see Adapter your local NordicTrack dealer or call the telephone Surge Suppressor number on the front cover of this manual and order part number 146148, or see your local electronics store.
  • Page 14 CONSOLE DIAGRAM PRLIST FEATURES OF THE CONSOLE coaches you through every step of your workout. One demo iFit card is included. Additional iFit cards are available separately. To purchase iFit cards, go to The treadmill console offers an impressive selection of www.iFit.com or call the telephone number on the features designed to make your workouts more effec- front cover of this manual.
  • Page 15 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
  • Page 16 5. Follow your progress with the displays. 6. Measure your heart rate if desired. The matrix—When you Note: If you use the handgrip pulse sensor and the optional chest pulse sensor at the same select the manual mode, time, the console will not display your heart the matrix will display a rate accurately.
  • Page 17 HOW TO USE A PRESET WORKOUT speed setting for the current segment. At the end of each segment, a series of tones will sound and the 1. Insert the key into the console. next segment of the profile will begin to flash. The new speed and incline settings will appear in the See HOW TO TURN ON THE POWER on page 15.
  • Page 18 HOW TO CREATE A CUSTOM WORKOUT cline of the treadmill as desired by pressing the speed and incline buttons. 1. Insert the key into the console. When the first segment of the workout ends, a se- See HOW TO TURN ON THE POWER on page 15. ries of tones will sound and the current speed and incline settings will be saved in memory.
  • Page 19 HOW TO USE A CUSTOM WORKOUT If desired, you can redesign the workout while using it. To change the speed setting or the in- 1. Insert the key into the console. cline setting for the current segment, simply press the Speed or Incline buttons. When the cur- See HOW TO TURN ON THE POWER on page 15.
  • Page 20: How To Use Ifit Card

    HOW TO USE AN IFIT CARD 3. Press the Start button to start the workout. 1. Insert the key into the console. A moment after you press the Start button, the treadmill will automatically adjust to the first speed See HOW TO TURN ON THE POWER on page 15. and incline settings of the workout.
  • Page 21 HOW TO USE A PULSE WORKOUT 5. Press the Start button to start the workout. CAUTION: A moment after you press the Start button, the treadmill will automatically adjust to the first speed If you have heart prob- and incline settings of the workout. Hold the lems, or if you are over 60 years of age and handrails and begin walking.
  • Page 22 To stop the workout at any time, press the Stop TELEVISION SETTINGS on page 24). If you are button. To restart the workout, press the Start but- using an antenna, make sure that it is properly ton. The walking belt will begin to move at 1 mph; connected and adjusted for optimal reception (see however, when the console compares your HOW TO CONNECT AN ANTENNA on page 12).
  • Page 23 HOW TO OPERATE THE REMOTE CONTROL Press the Info button to view information about the cur- rent program and the broadcast or cable signal. The first time you use the re- mote control, insert batteries Press the CC button repeatedly to turn on or turn off (see HOW TO CHANGE THE closed captioning.
  • Page 24 HOW TO ADJUST TELEVISION SETTINGS 4. Adjust the time settings. You must use your remote control to adjust television Adjust the OSD (on-screen display) duration, sleep settings. Press the Menu button to enter the main timer, time zone, or daylight saving time. The clock menu or to return to a previous menu.
  • Page 25 6. Locate and save channels. After all valid chan- nels available in your Select CATV or AIR. Select CATV to receive chan- area have been nels through a CATV cable. Select AIR to receive saved into the televi- Program Name Skip FD 3803 channels through an antenna.
  • Page 26 THE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM The console features an information mode that keeps To play music or audio books track of the total distance that the walking belt has through the consoleʼs stereo moved and the total number of hours that the treadmill speakers, you must connect has been used.
  • Page 27: How To Fold And Move The Treadmill

    HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If you do not do this, you may permanently damage the treadmill. Remove the key and unplug the power cord.
  • Page 28: Troubleshooting

    TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
  • Page 29 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 13. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
  • Page 30 PROBLEM: The remote control does not function correctly SOLUTION: a. Make sure you are standing on the treadmill, holding the remote control near the television and pointing the remote control directly at the console. b. If your remote control is still not functioning correctly, the batteries should be replaced; most re- mote control problems are the result of low batteries.
  • Page 31 PROBLEM: Television reception is poor SOLUTION: a. Make sure that the television settings are set correctly. See HOW TO ADJUST TELEVISION SETTINGS on page 24. b. For the digital television to operate properly, good reception is necessary. If you are using an an- tenna, make sure that it is properly connected and adjusted for optimal reception.
  • Page 32: Exercise Guidelines

    EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning any time. During the first few minutes of exercise, your exercise program, consult your physician. body uses carbohydrate calories for energy. Only after This is especially important for persons over the first few minutes of exercise does your body begin age 35 or persons with pre-existing health...
  • Page 33: Part List

    PART LIST—Model No. NTL17008.0 R0109A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description #8 x 1" Tek Screw Left Foot Pad 3/8" x 1 1/4" Bolt Drive Roller Ground Wire 3/8"...
  • Page 34 Key No. Qty. Description Key No. Qty. Description 25" Wire Harness Left Pulse Sensor Handrail Frame Right Pulse Sensor Console Ground Wire Pulse Bar Left Bottom Handrail Cover Accessory Cover Right Bottom Handrail Cover Handrail Frame Cap Console Back Console Clamp Console Insert 80"...
  • Page 35: Exploded Drawing

    EXPLODED DRAWING A—Model No. NTL17008.0 R0109A...
  • Page 36 EXPLODED DRAWING B—Model No. NTL17008.0 R0109A...
  • Page 37 EXPLODED DRAWING C—Model No. NTL17008.0 R0109A...
  • Page 38 EXPLODED DRAWING D—Model No. NTL17008.0 R0109A...
  • Page 39 EXPLODED DRAWING E—Model No. NTL17008.0 R0109A...
  • Page 40: Ordering Replacement Parts

    ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

This manual is also suitable for:

Reflex tr

Table of Contents