Table of Contents
Advertisement
1.
Align the LAN connector with the port opening on the
rear of the Docking Cradle
2.
Push the connector into the port until it is seated.
3.
Plug the other end of the cable into a LAN outlet.
Figure 5. Connecting the LAN/Docking Cradle
Connecting an External Video Device
1.
Align the external video cable to the connector on the
Docking Cradle
2.
Tighten the two hold-down screws, located on each side of
the connector.
Figure 6. Connecting an external video device
6
(Figure 5)
(Figure 6)
.
.
Advertisement
Table of Contents
Need help?
Do you have a question about the Docking Cradle and is the answer not in the manual?