Initial Setup Manual Ver. 1.3 for Using the Remote Control App
This manual describes initial setup to remote control JVC D-ILA projector (hereinafter referred to as the projector)
using smartphones and tablets.
Compatible projectors
DLA-X900R, DLA-X700R, DLA-X500R, DLA-RS67, DLA-RS57, DLA-RS49, DLA-RS6710,
DLA-RS4910, DLA-XC7880R, DLA-XC5880R
Operating Conditions
The following conditions are necessary to remote control the projector using smartphones and tablets.
iOS
• Compatible device: iPhone4S/5/5S/5C, iPad2 or later, iPod touch(4th generation or later), iPad mini
• Compatible OS: iOS 6 or later
Android
• Compatible device: Android devices
• Compatible OS: Android OS 4.0 or later
* In order to operate the projector, it is necessary to first install an exclusive app on your terminal device. The
exclusive application is available free of charge.
* Operability of all functions is not guaranteed.
• A wireless LAN network environment connected with the projector via wired LAN.
Requirements
• Compatible projector
• Compatible device
• Wireless LAN router* (hereinafter referred to as router), and LAN cable that connects the projector and router.
* A router with DHCP server function.
Procedures for the initial setup
1
Setting up a device
2
Connection and setup of a D-ILA projector and a router
3
Installation and setup of app
4
Demo mode
D-ILA Home Theater Projector
(D-ILA Remote 2)
1