Ripping; The Ripping Process; Copyright Issues - NAIM UNITISERVE-SSD Reference Manual

O pe r a t io n - R i pp i n g

6 Ripping

UnitiServe-SSD will only fulfil its potential if it holds a significant library of music. A typical
music CD carries approximately 600MB of data so every 1TB of network storage capacity
will hold approximately 1500 CDs. Ripping a typical CD takes up to ten minutes thanks to
the advanced data handling algorithms that ensure, unless the CD is badly damaged, the
ripped data is always a "bit-perfect" copy.
6. 1 The Ripping P ro c e ss
Ripping CDs to UnitiServe-SSD is a simple process. It is
preferable while ripping for UnitiServe-SSD to be connected
to a working and reliable internet service.
Note: An internet connection is necessary for UnitiServe-SSD
to identify CDs and download their artist, title, track listing
and artwork data. If UnitiServe-SSD is unable to access
the internet while ripping, it will initially interrogate a small
internal database for the CD's associated data. If the CD is
not found on the internal database, only the ripped audio
data and its identification code will be stored. Manual
input of CD data or further AMG and FreeDB database
requests can be made via the Desktop Client application
once an internet connection is re-established.
Note: Right-click on the album name in the Desktop Client
interface to request an online database lookup manually.
To rip a CD insert the CD in the UnitiServe-SSD transport
slot. Ripping will begin automatically and takes up to eight
minutes.
Note: It is good practice to check that the playing surface
of each CD is clean before ripping.
Note: Ripping can be cancelled once underway by
touching the UnitiServe-SSD front panel logo or selecting
Abort on the Display Interface Ripping Monitor page.
When UnitiServe-SSD has ripped the CD and downloaded
its associated data it will eject the CD automatically. As
soon as a CD has been ejected, UnitiServe-SSD is ready
to rip the next one. The
feedback on progress as the ripping process takes place.
Note: UnitiServe-SSD may be unable automatically to eject
CDs that are outside usual manufacturing tolerances. If
this occurs, carefully insert an unfolded paperclip into the
access hole beneath the CD loading slot and push to
actuate the manual eject mechanism.
The CD will be included in UnitiServe-SSD's music library
listing about 1 minute after it has been successfully ripped.
It will then be available for playback either locally or across
a NaimNet network.
Note: Ripping to an external Music Store may result in
a longer delay before UnitiServe-SSD's library listing is
updated.
Ripping Monitor menu provides
6 .2 Cop yri g ht I ss ues
The music carried on a CD, and the recording of the CD
itself, is likely to be the subject of copyright restrictions
which allow the owner of the CD only to make copies
(ripping in effect copies a CD) for personal use only.
Ripping CDs that you don't personally own may violate
copyright law.
Note: CD copyright law may vary with territory.
19