Disassembly; Lid Assy, Upper", Holder Assy; Mechanism Deck - Sony Walkman MZ-E300 Service Manual

MZ-E300
• The equipment can be removed using the following procedure.
"Lid ASSY, Upper",
Set
Holder ASSY
Note : Follow the disassembly procedure in the numerical order given.

3-1. "LID ASSY, UPPER", HOLDER ASSY

Holder ASSY installation
Note :
1. Attach the holes on Holder ASSY to the projections on right and left sides.
2. Attach Spring (POP/L) as shown in the figure.
Holder ASSY
Reinforcement
Spring (POP/L)
5 Holder ASSY

3-2. MECHANISM DECK

5 Motor flexible board
7 Screws, tapping (1.7)
Reinforcement
4
SECTION 3

DISASSEMBLY

Mechanism deck
4 Move it away
from projection
1 Screw (MD), step
2
8
Case ASSY
Main board
Optical pick-up ASSY
3 Lid ASSY , Upper
Case ASSY
Mechanism deck
4
3 Claw
1 Screws (1.4),MI
2 Move it away
from projection
4 Move it away
from projection
6 OP flexible board