Operating Instructions; Specifications; Cleaning - Airworks 12MDWA Owner's Manual

OPERATING INSTRUCTIONS

Place the fan on a safe flat surface where it cannot fall or be pulled by the cord. Plug fan into a 120V/60Hz outlet and
follow the operating instructions:
This fan is equipped with three fan speeds to allow for optimal air comfort.
0- Pressing this button will power the fan OFF.
1- Pressing this button will power the fan ON at LOW speed setting.
2- Pressing this button will power the fan ON at MODERATE speed setting.
3- Pressing this button will power the fan ON at HIGH speed setting.
This fan has two functions which will allow you to better customize your preferred air comfort as well as improve
the air circulation in the room:
OSCILLATION: To activate the oscillation function for widespread breeze distribution, simply press the oscillation knob
down (located on top of the fan's motor house). To turn off the oscillation function for a targeted breeze setting, pull the
oscillation pin up. Controlling the oscillation can be done while the fan is operating.
TILT: To tilt the fan head so that the breeze is targeted at an angle, steady the base of the fan with one hand and grip the
motor housing with another, carefully tilt the head of the fan until it reaches the desired angle. Be careful as to not tilt the
head back further than it is intended to go, doing so will damage the unit.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
CLEANING INSTRUCTIONS
1. Always disconnect the cord from the electrical outlet when cleaning your fan.
2. Light accumulated dust may be removed by using a soft cloth to wipe away the dust at the back grille of the fan.
3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry thoroughly with a soft
dry cloth before operating the fan.
4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damages to it.
CAUTION: DO NOT ALLOW WATER TO RUN INTO THE INTERIOR OF THE FAN AS THIS COULD CREATE A FIRE
OR ELECTRIC SHOCK HAZARD. THE FAN MOTOR IS FACTORY LUBRICATED FOR LIFE AND WILL REQUIRE NO
FURTHER LUBRICATION. NO OTHER USER MAINTENANCE IS REQUIRED OR RECOMMENDED. IF SERVICE IS
REQUIRED, SEND YOUR FAN TO THE NEAREST AUTHORIZED SERVICE DEPOT.
Airworks
12MDWA
OPERATING INSTRUCTIONS

SPECIFICATIONS

MODEL NUMBER 12MDBW
ITEM NUMBER 12MDWA
WATTAGE 35
VOLTAGE 120V AC, 60Hz
WEIGHT(KG) 2.1
DIMENSIONS (cm) 39.5x17.5x34
CLEANING INSTRUCTIONS
5