File Sharing - IOGear BOSS GNS1000 GNS1000 GNS1000 User Manual

You will go back to the Advanced Setting page. Please
check the NFS Mapping List in NFS Setting section. The
mapping rule you created is in the list.
• FTP Setting
Please select the "Enable" radio button in FTP Server
field and click the Apply button.
To enable the FTP server, you also have to enable
the file sharing and create the user's account and
password.

8.3 File Sharing

For file sharing, you must create users and groups
first. If already complete, it is time to create the share
folder and assign users/groups. To assign the users/
groups to a folder, please follow the steps below:
The folder created after the HD initialization should
1.
be on the Share Name List.
Click the "NEW" button.
2.
The Files Access Control page should now appear.
3. Enter the folder name in the Sharing Name field.
(e.g. party) The sharing name is the name of the
folder you would share over the network.
4.
Select one of the radio buttons in the Selection field.
(e.g. select the "Users" radio button) Select the
"Users" radio button if you are allowing access to
the folder based on users. Select the Groups radio
button if you are allowing access to the folder based
on groups.
57
NAS Management