Channels And Codes - Motorola i570 User Manual

are set to appears on the second line of the
display and TA Ready appears just above the
softkeys.
Note: When switching from the network to
Talk Around, the last channel and code that were
set appear on the Talk Around idle screen.
While in Talk Around, this icon m appears on the
display, indicating that there is no network
signal and Talk Around is active.
Phones used in Talk Around mode should be
a minimum of 6 feet apart to maximize
performance and improve transmission range.
exit Talk Around
Find it: M > TA Options > Exit TA.
The following message displays: Switching to
Network Please Wait displays. After a few
seconds, the network idle screen appears.

channels and codes

Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies
that allow you to make and receive Talk
Around calls. Other parties may also be
talking on the same channel.
Codes help minimize interference from
unwanted messages and other disturbances
when you are on the same channel as others.
To have a conversation, all parties must be on
the same channel and code. For private Talk
Around calls, the person you are calling must
be in Talk Around and set to the same
channel to receive your call.
Note: When making a code call, all parties
that are on your code and channel can hear
your conversation.
47
calls