Adjusting The Sound - Honda 2000 Civic Sedan Owner's Manual

Main Menu Table of Contents
Audio System

Adjusting the Sound

Bass, Treble, Balance, and Fader are
each adjustable. You select which of
these you want to adjust by pressing
the MODE button. The mode
changes from BAS to TRE to FAD to
BAL, and then back to VOL each
time you press the button. Each
mode is shown in the display as it
changes.
Balance/Fader — These two
modes adjust the strength of the
sound coming from each speaker.
BAL adjusts the side-to-side strength,
while FAD adjusts the front-to-back
strength.
Select BAL or FAD by pressing the
MODE button. Adjust the Balance or
Fader to your liking by turning the
PWR/VOL knob. The indicator bars
on the display show you the range.
Comfort and Convenience Features
MODE BUTTON
PWR/VOL KNOB
Treble/Bass — Use these modes to
adjust the tone to your liking. Select
TRE or BAS by pressing the MODE
button. Adjust the desired mode by
turning the PWR/VOL knob. The
indicator bars on the display show
you the range.
As you adjust a mode, you will hear a
beep whenever the indicator bar
reaches the center, far left, and far
right of its range. The system will
automaticall y return the display to
normal mode about seven seconds
after you stop adjusting a mode with
the PWR/VOL knob.
Radio Frequencies and Reception
For information, See page 127.