Table of Contents
Advertisement
Video is not output in high definition.
Confirm that the "HDMI Video Mode", "HDMI Video
Format", and "Component Resolution" in the Setup menu
are set properly. (
30)
The video output resolution is restricted to "576p/480p"
when DVD-Video discs, DivX and BD-Video discs
recorded at a rate of 50 field per second are output from
the COMPONENT VIDEO OUT terminals.
A black band is displayed around the edge of
the screen.
The aspect ratio of the screen is abnormal.
Confirm the "TV Aspect" is set properly. (
Adjust the aspect setting on the television.
(Adjustment using "Screen Aspect" (
also possible.)
Audio
Cannot switch audio.
When connecting an amplifier/receiver using a COAXIAL/
OPTICAL terminal or an HDMI terminal, you cannot
switch the audio if "Digital Audio Output" is set to
"Bitstream". Set "Digital Audio Output" to "PCM" or
connect using AUDIO OUT terminal. (
Cannot hear the desired audio type.
Check the connections and the "Digital Audio Output"
settings. (
29)
When the unit is connected to an amplifier/receiver with
the AUDIO OUT terminal, set "Analog Audio Output".
(
30)
To output audio from a device connected with an HDMI
cable, set "HDMI Audio Output" to "On" in the Setup
menu. (
30)
Playback
Disc cannot be played.
The disc is dirty. (
4)
Check the region code.
The contents of the USB device cannot be
read.
USB devices connected using USB extension cable or a
USB hub may not be recognized by this unit.
[For[Australia[and[New[Zealand]
The supplied USB extension cable is available for use.
If inserted during playback the USB device may not be
recognized by this unit.
If two USB devices are connected simultaneously, they
will not be recognized by this unit.
[For[Australia[and[New[Zealand]
USB ports can be used simultaneously only with the
supplied Wireless LAN Adaptor (
30)
17) on the unit is
9, 29)
10).
Still pictures (JPEG) do not playback
normally.
The images that were edited on the PC, such as
Progressive JPEG, etc., may not playback.
I can't play back BD-Live.
The SD card is write-protected. (
Confirm that this unit is connected to the broadband
Internet. (
10, 31)
Confirm the "BD-Live Internet Access" settings. (
Confirm an SD Card is inserted into the SD Card slot.
(
15)
Network
I can't connect to the network.
Confirm the network connection and settings. (
Check the operating instructions for each device and
connect accordingly.
[For[Australia[and[New[Zealand]
When using Wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
Higher transfer rate router such as 802.11n (2.4 GHz or 5
GHz) Wireless router (Access Point) may solve the
problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless
router (Access Point), it is necessary to set the encryption
type to "AES".
Simultaneous use with a microwave, cordless telephone
etc. at 2.4 GHz may result in connection interruptions or
other problems.
On the "Access Point Connection Setting" screen (
the continuous lighting of at least 4 "Reception" indicators
is the target for a stable connection. If 3 or fewer
indicators are lit or the connection is being interrupted,
change the position or angle of your Wireless router
(Access point) and see if the connection state improves. If
there is no improvement, connect to a wired network and
perform the "Network Easy Setting"(
7)
28)
10, 31)
31),
12) again.
33
VQT2H83
Hide quick links:
Advertisement
Table of Contents
