Summary of Contents for IOGear Bluetooth USB Print Adapter GBP201 GBP201 GBP201
Page 1
Wireless USB Print Adapter with Bluetooth T echnology User Manual (GBP201)
Page 3
All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document.
Table of Contents Package Content Overview Features Requirements Introduction Installation Operation Specification Technical Support Radio and TV Interference Statement Limited Warranty...
Package Contents This package contains: 1 Bluetooth print adapter 1 USB B-B cable 1 User manual 1 Warranty registration card * If any items are damaged or missing, please contact your dealer.
Overview IOGEAR’s palm sized single-port Wireless USB Print Adapter with Bluetooth Technology allows any Bluetooth enabled computer to wirelessly send print jobs to a USB printer. It complies with USB 1.1 specifications and the Bluetooth 1.1 specifications. It supports data transmission rates of up to 723 Kbps, and a wireless access range of up to 66 ft (20 meters).
Features • Allows any Bluetooth enabled computer to wirelessly send the print job to a USB printer • Plug and Play, easy to install • Bluetooth Class 2 device with a 66 ft range (20 meters) • Supports data rate of 723 Kbps •...
1. USB Port – connect to the USB printer. 2. Power LED – Red after powered on. 3. Link LED – Flashes green after powered on. 4. Power – 5V, 1A. Introduction...
Also, we do not cover the procedures of installing Bluetooth driver to your computer, we assume the computer is already Bluetooth enabled. If you are using an IOGEAR Bluetooth USB adapter, please refer to the manual for that unit for the detailed procedures.
Page 11
Installation 1. From the Bluetooth enabled computer, click the Bluetooth logo on your screen, then click My Bluetooth Place, then select Entire Bluetooth Neighborhood.
Page 12
Installation 2. You can see that the computer starts searching for the Bluetooth devices within the range. The Bluetooth print adapter should be found as shown in the follow window:...
Page 13
Installation 3. Double click on the icon of the IOGEAR Bluetooth adapter. Click OK on the prompted question. (This question would not be prompted if the printer driver is already installed.)
Page 14
Installation 4. The following window will be prompted for you to select the appropriate driver. (This step would be skipped if the printer driver is already installed.)
Page 15
5. Select the appropriate driver, or click on “Have Disk…”. Follow the installation step provided by the printer manufacturer. 6. After the driver installation, go to Control Panel, and select Printers, the printer that you just installed should be in the following window: Installation...
Page 16
Installation 7. Right click the printer icon (in this case the Epson C62), select Properties from the drop down menu.
Page 17
Installation 8. Select Ports on the Printer Properties screen, and check the IOGEAR print adapter port, then click OK.
Page 18
Installation 9. The installation is done. You can print a document to test it, this printer should be on the printer list already, as shown in the following window.
Page 19
Installation Or, you can click open the printer Properties page again and select Print Test Page.
Operation After the print adapter is installed and the test page has printed fine, you will be able to print wirelessly just as if the printer is connected directly to your computer. You should be able to see the printer in the screen similar to the following print screen: This print adapter can be paired to up to 7 computers, the print jobs will be handled on a first come first serve basis.
Technical Support If you need technical support, please check out our IOGEAR Tech Info Library (T.I.L.) at www.iogear.com/support for the latest tips, tricks, and troubleshooting. The IOGEAR T.I.L. was designed to provide you with the latest technical information about our products. Most of the answers to your questions can be found here, so please try it out before contacting technical support.
Radio & TV Interference Statement WARNING!!! This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK OR ITS DOCUMEN- TATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.