Advertisement
HARDWARE INSTALLATION
P
r
e
c
a
u
t
i
o
P
r
e
c
a
u
t
i
o
Before the installation, make sure the USB port exists in
your computer and is enabled. Go to My Computer
Control Panel
check if the Universal Serial Bus controller device is
found.
1.
You can connect this modem without powering
down your PC.
2.
Connect the USB connector on the modem to the
USB port of your PC.
3.
Connect the phone line to the phone jack on your
modem.
4.
Windows will detect the new hardware
automatically. You are ready to start software
installation. (Please go to below sections for more
details).
n
n
System. Open the Device Manager tab,
- 1 -
Advertisement
