Advertisement
Quick Links
Advertisement
Related Manuals for Abocom EFM560
Summary of Contents for Abocom EFM560
- Page 1 External Fax Modem 56K User Guide M73-APO02-210...
-
Page 2: Hardware Installation
HARDWARE INSTALLATION To install the External Fax Modem 56K card perform the following steps: 1. Turn off your computer. Make sure the power switch of your External Fax Modem 56K is also set to off. 2. Connect the RS-232 cable to your External Fax Modem 56K with one end to the RS-232 port on the rear panel of the External Fax... - Page 3 5. Connect the telephone line to the RJ-11 other telephone jack in your wall. Note: provided with this unit. Using any incorrect power adapters will cause permanent and unpredictable damage to this External Fax Modem 56K. Line port, only - 2 - connect line into...
-
Page 4: Software Installation
SOFTWARE INSTALLATION Windows 95/98 1. Be sure the External Fax Modem computer. Turn on your computer and start Windows. 2. Windows will automatically detect the new hardware device. Click Next to continue. 3. Load the External Fax Modem 56K floppy disk or compact disc into your prompts Windows to do? Select Search for... - Page 5 3. Modem Windows 2000 detects the modem. Start Settings Control Panel Phone and Modem Options. 4. Click the Modem tab and press the Add button to add it in. 5. Click Next to set up the modem. 6. Click Finish. 7.
- Page 6 9. Click the Driver tab and press the Update Driver button. 10.When the Upgrade Device Driver Wizard window appears, click Next. - 5 -...
- Page 7 11.Select known drivers for this device so that driver and click Next. 12.Highlight Lucent Venus Modem PnP and click the Have Disk button. 13.Load the floppy disk or compact disc device driver and type the drive path. Display choose whichever Click OK.
- Page 8 14.Click Next. 15.Click Next. 16.Click Yes. - 7 -...
- Page 9 17.Click Finish. 18.When back Modem click driver updating. 19.To verify if the device is well installed enabled, go to the Device Manager window. 56K should be found on the list. If not, contact your dealer for technical support. Properties Close your The External Fax Modem - 8 -...
- Page 10 Installation for Windows Millennium 1. Be sure the External Fax Modem computer. Turn on your system and start Windows Millennium. 2. Go Panel System Device Manager. 3. Modem Windows modem. Start Settings Control Panel Modems. 4. Click the General tab and press the Add button to add it in.
- Page 11 5. Click Next to set up the modem. 6. Click Finish. 7. Go back click Panel System 8. Click Modem to expand. Lucent Venus Modem PnP and select Properties. your Start Settings Control Device Manager. - 10 - desktop, Highlight...
- Page 12 9. Click the Driver tab and press the Update Driver button. 10. Select Specify the location of the driver (Advanced) and click Next. - 11 -...
- Page 13 11. Select Display a list of all the drivers in a specific location, so you can select the driver you want and click Next. 12. Highlight Lucent Venus Modem PnP [6-8-2000] Disk button. press - 12 - Have...
- Page 14 13. Load the floppy disk or compact disc device driver and type the drive path. 14. Click Next. 15. Click Next. whichever Click OK. - 13 - contains...
- Page 15 16. Click Finish. 17. When back Modem click driver updating. 18. To verify if the device is well installed enabled, go to the Device Manager window. 56K should be found on the list. If not, contact your dealer for technical support. Properties Close your...
- Page 16 Windows NT 1. Go to My Computer Double-click Add… button. Click Next. 2. Follow the on-screen instruction to proceed. When the following dialog Change... Modem. appears, - 15 - Control Panel. Click select...
- Page 17 3. Select ‘‘Install New Modem’’ window. And make sure the External Fax Modem 56K floppy disk or Compact Disc is loaded into your computer. 4. Direct to your floppy disk drive CD-ROM EXTERNAL.INF. screen instruction to proceed. Have Disk…from drive Follow - 16 - select...
- Page 18 5. Press Next to continue. 6. Click Finish complete installation. - 17 -...