Download Print this page

Fishman Aero Plus User Manual

Onboard preamp

Advertisement

Quick Links

USER GUIDE
AERO PLUS ONBOARD PREAMP

Advertisement

loading

Summary of Contents for Fishman Aero Plus

  • Page 1 USER GUIDE AERO PLUS ONBOARD PREAMP...
  • Page 2 1. Set the controls • Set volume and notch off. Set the bass, middle, treble and brilliance controls to center. 2. Plug in • Connect the Aero Plus to your amplifi er or PA with a ¼-inch in- strument cable. The battery light (batt) will fl ash once quickly to indicate it has switched on.
  • Page 4 Aero Plus Controls Volume • For the cleanest signal, set the volume knob as high as possible, without causing distortion or feedback. Bass • Boost here to add depth and weight to the sound of the guitar. Middle • Turn the middle knob all the way left for a smooth “scooped out”...
  • Page 5 To conserve power, unplug the instrument and turn off the tuner when not in use. Replace the battery by fl ipping open the preamp body using the latch located above the Fishman logo. Be sure to observe the correct polarity during this installation.
  • Page 6 Sample EQ Settings Fingerstyle “Scooped” Mid This will add fullness to the bass This setting emphasizes extreme bass and defi nition to the treble. and treble...
  • Page 7 Strummer Cut Through the Mix A good setting for strumming chords. When you need to be heard through a loud band.
  • Page 8 www.fi shman.com 513-300-144 Rev A 3-08...