Echo QV-8000 Instruction Manual page 12

OPERATION (Pre-Ventilation Procedures)
When the engine is hard to start
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
1. When using throttle latch for starting, keep
the brake in lock position.
2. After starting the engine, squeeze throttle
trigger slightly to release throttle latch and
pull front hand guard towards the operator
immediately.
(Chain brake unlocked position)
3. Do not increase engine speed while chain
brake is locked.
4. Use the chain brake only in starting or in
emergencies.
5. Never use throttle latch for cutting.
Use it only when starting the engine.
• Move chain brake lever fully forward to lock chain
brake before starting.
• Press throttle trigger lockout down while
grasping throttle trigger and push in throttle latch.
• Move ignition switch to "RUN" position.
• Securely hold the chain saw as shown and pull
starter handle.
• When engine starts, immediately squeeze throttle
trigger, to release throttle latch, and pull front hand
guard towards the operator immediately. (Chain
brake unlocked position)
QV-8000 TYPE1-E
CAUTION
CAUTION
Push
Throttle latch
Starter handle
10
Lock chain brake
Throttle trigger lockout
Throttle trigger
Start/Run
Ignition switch
Unlock chain brake