Acura 2007 MDX Owner's Manual page 71

Main Menu Table of Contents
Vehicle Stability Assist
(VSA) System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position.
If it comes on and stays on at any
other time, or it does not come on
when you turn the ignition switch to
the ON (II) position, there is a
problem with the VSA system. You
will also see a ''CHECK VSA
SYSTEM'' message on the multi-
information display (see page
Take your vehicle to a dealer to have
it checked. Without VSA, your
vehicle still has normal driving ability,
but will not have VSA traction and
stability enhancement. For more
information, see page 351
This indicator may also come on if
there is a problem with the trailer
stability assist function (see page
).
367
VSA Activation Indicator
This indicator has four functions.
1. It comes on as a reminder that you
have turned off the vehicle
stability assist (VSA) system.
2. It flashes when VSA is active (see
page 351
It flashes when trailer stability
3.
assist is activating (see page
). It comes on along with the VSA
81 4.
system indicator if there is a
problem with the VSA system.
You will also see a ''CHECK VSA
SYSTEM'' message and a
''CHECK TRAILER STABILITY
. ASSIST'' message on the multi-
information display (see page
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
).
367 ).
81 ).
Instrument Panel Indicators
position. For more information, see
page 351 .
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicator does not
blink or blinks rapidly, it usually
means one of the turn signal bulbs is
burned out (see page
398
the bulb as soon as possible, since
other drivers cannot see that you are
signaling.
When you press the hazard warning
button, both turn signals blink. All
turn signals on the outside of the
vehicle should flash.
). Replace
67