Compass - Acura 2007 MDX Owner's Manual

Main Menu Table of Contents
Canadian MDX model
Compass Operation
Compass operation can be affected
by driving near power lines or
stations, across bridges, through
tunnels, over railroad crossings, past
large vehicles, or driving near large
objects that can cause a magnetic
disturbance. It can also be affected
by accessories such as antennas and
roof racks that are mounted by
magnets.
Compass Calibration
If you see '' '' in the compass
display and ''CAL'' and ''
shown in the calendar display, the
compass is self-calibrating.
The compass may need to be
manually calibrated after exposure to
a strong magnetic field. If the
compass seems to be continually
showing the wrong direction and is
not self-calibrating, do the following.
COMPASS DISPLAY
1. Press and hold the SET button for
five seconds until the Clock
'' are display changes to ''ZON? N.''
(Please note that clock adjustment
mode will be started after the first
two seconds.)
2. Press the SET button. ''CAL? N''
will be displayed. At this point,
pressing SET button will exist
calibration mode.
3. Press the button. ''CAL? Y'' wiil
be displayed.
4. Press the SET button. The
compass display will change to
'' '' and ''CAL'' and ''
shown.
5. Drive the vehicle slowly in two
complete circles.

Compass

Press and
hold SET
Press SET
Press
'' are
CONTINUED
269