Related Manuals for IOGear GICe711S3W6
Summary of Contents for IOGear GICe711S3W6
- Page 1 Installation Installation Installation Guide eSATA 3Gbps 1 external & 1 internal port Low profi le PCI Express Host Card GICe711S3W6 PART NO. M0556...
-
Page 3: Table Of Contents
Table of Contents Introduction Feature Package Contents Software Installation Federal Communications Commission (FCC) Statement CE Statement Limited Warranty Contact... -
Page 4: Introduction
Introduction The Low Profi le PCI Host Adapter can support both Low profi le PCI and standard size PCI. The card allows you to upgrade your desktop computer with a 2 port Serial ATA transfer rate of 3 Gb/s. The unit also gives you the option of accessing multiple media sources, such as: Hard Drives, CD-RWs, DVD-ROMs and DVD-RAM. -
Page 5: Feature
Features • External SATA II (eSATA) Connector • 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB • Supports 1-lane 2.5Gbps PCI Express • Hot-plug capability • Supports SATA II transfer rate of 3.0Gbps • Fully compliant with Serial ATA 1.0 specifi cations •... -
Page 6: Package Contents
Package Contents eSATA PCI Express Host Adapter • • Low profi le PCI bracket • SATA cable Quick Start Guide • • Driver CD... -
Page 7: Software Installation
Software Installation Windows XP Driver Installation 1. Power off the system. Insert the SATA Card into an available PCI slot. Connect the serial ATA cable(s) to the SATA port and serial ATA device(s). Power up the system. 2. Insert the Driver CD into the CD-ROM/DVD drive. 3. - Page 8 Verify Windows XP Installation For Windows XP 1. Right click on the ‘My Computer’ icon, select ‘Properties’. Left click on the ‘Hardware’ tab, and then select the ‘Device Manager’ button. 2. Double click on ‘SCSI and RAID Controllers’, If there is no yellow ‘! ‘ or ‘ ? ‘ in front of ‘Silicon Image SiI 3132 SATALink Controller’, the driver is functioning properly.
-
Page 9: Federal Communications Commission (Fcc) Statement
Federal Communications Commission (FCC) Statement Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifi cations not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. - Page 10 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1.
-
Page 11: Ce Statement
CE Statement This device has been tested and found to comply with the requirements set up in the council directive on the approximation of the law of member states relating to EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC and R&TTE Directive 99/5/EC. -
Page 12: Limited Warranty
fi tness for a particu- lar purpose. IOGEAR shall not be responsible or liable for property damage, loss of use, interruption of business, lost profi ts, lost data or other consequential, punitive or special damages, however caused and however alleged. -
Page 13: Contact
All information furnished here is for informational purposes only and is subject to change without notice. IOGEAR, Inc. assumes no responsibility for any inaccuracies or errors that may appear in this document. - Page 16 The use of our technology solutions helps reduce electronic waste. HEALTH IOGEAR supports healthy and fi t lifestyles. By integrating products with the latest scientifi c developments, IOGEAR’s solutions enhance the life of end-users. © 2007 IOGEAR, INC.
Need help?
Do you have a question about the GICe711S3W6 and is the answer not in the manual?
Questions and answers