Table of Contents
Advertisement
Adjusting Sound Levels Manually:
Sound levels are set automatically by default.
1. Press the MENU button.
2. Turn the SEL/PUSH EXEC dial to select the
TAPE SET menu, then press the dial.
3. Turn the SEL/PUSH EXEC dial to MIC
LEVEL then press the dial.
4. Turn the SEL/PUSH EXEC dial to select
MANUAL then press the dial.
5. Press the MENU button to erase the
menu display.
6. Press the AUDIO LEVEL button to display
the recording level adjustment display.
7. Turn the SEL/PUSH EXEC dial to adjust the
recording level.
8. To return to automatic sound levels, repeat
steps 1-3 above, and select AUTO in step 4.
CCD:
Stands for Charged Coupled Device. It is the
imaging device made of light sensing pixels,
which are used in the camera to capture images
for video. Higher pixel count usually means bet-
ter image and detail quality.
White Balance:
White balance adjustment makes white objects
appear white and allows more normal color bal-
ance for camera recording. Normally automati-
cally adjusted, but it can be adjusted manually
when lighting characteristics change or when
shooting outdoors.
Sony VX-2000
AUDIO LEVEL
button
MENU button
SEL/PUSH EXEC
dial
Releasing Steadyshot:
1. Press the MENU button.
2. Turn the SEL/PUSH EXEC dial to select
CAMERA SET then press the dial.
3. Turn the SEL/PUSH EXEC dial to select
STEADYSHOT then press the dial.
4. Turn the SEL/PUSH EXEC dial to select
OFF then press the dial.
5. Press the MENU button to erase the
menu display.
Glossary
Shutter Speed:
Shutter speed is the speed at which the camera
captures the image. The shutter ranges from
1/4 - 1/10000, with smaller setting (or larger
value indicator value) in the viewfinder meaning
increased shutter speed.
AUTO LOCK Switch:
The switch is used when adjustment for expo-
sure, shutter speed, white balance, and Program
AE is needed. The center position on the AUTO
LOCK switch is used for making manual adjust-
ments. The top position on the AUTO LOCK
switch is used to allow the camcorder to set
function(s) automatically. The bottom position,
HOLD, is used to maintain or hold the manual
position, once set.
5
Advertisement
Table of Contents
