Wi- -Fi - Bryant T2--WHS01 Owner's Manual

Enable Heating/Cooling Alerts
Select No if you do not want the Legacy Line Wi- -Fi Thermostat to
generate an alert if a system is not responding to a call for heat or cool. If
disabled, these alerts will not be shown on the Legacy Line Wi- -Fi
Thermostat or Web Portal and no emails will be sent.

Wi- -Fi

The Legacy Line Wi- -Fi Thermostat supports Wi- -Fi 802.11 b/g/n. Use
the Advanced Configuration option in the Wi- -Fi menu to configure your
network parameters. Choose the network from the list or manually add a
new one (i.e. if your network does not broadcast its SSID).
To configure Wi- Fi manually:
From the Home screen, press MENU.
Select Wi- -Fi.
Adjust the network options for your home network.
You will then be able to view and configure the following network
parameters:
DHCP (select Disabled to use a static IP Address; if unsure, leave
d
DHCP Enabled)
SSID
d
Encryption (WEP, WEP128, WPA, or WPA2)
d
Password (if encryption is used)
d
Wi- -Fi Channel
d
IP Address and IP Subnet
d
Gateway Primary and Secondary DNS
d
If you need to specify your thermostat's MAC address in your router's
configuration, you can obtain it from the About menu.
26