Troubleshooting - Philips DVP3688 User Manual

• 5.1-channel analog output
• Front L&R : 2 Vrms (47k Ohm)
• Center: 2 Vrms (47k Ohm)
• Subwoofer: 1.15 Vrms (47k Ohm)
• Rear L&R: 2 Vrms (47k Ohm)
• Digital output: 0.5 Vp-p (75 Ohm)
• Coaxial
• HDMI output
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
• Constant bit rate:
• MP3: 8 kbps - 320 kbps
Main unit
• Dimensions (W x H x D):
310 x 39.5 x 210 (mm)
• Net Weight: 1.04 kg
Power
• Power supply rating: 110- 240V~, 50-60 Hz
• Power consumption: 11 W
• Power consumption in standby mode:
< 0.5 W
Accessories supplied
• Remote control and one battery
• HDMI cable
• Audio/Video cables
• User Manual
Laser specification
• Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
• Wave length: 658 nm (DVD), 790 nm
(CD)
• Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
• Beam divergence: 60 degrees
EN
16

6 Troubleshooting

Warning
•
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
No picture.
• The TV video input channel is not correctly
selected (see the TV's user manual).
• If you have changed a TV system setting,
switch back to the default setting: 1) Press
to open the disc compartment. 2) Press
SUBTITLE.
No picture on HDMI connection.
• If this player is connected to an
unauthorized display device, the audio/
video signal cannot be output.
• If the HDMI cable is faulty, replace it with a
new HDMI cable.
• If you have changed the setting for HDMI
video resolution, switch to its default mode.
No sound output from the TV.
• Make sure that the audio cables are
correctly connected between this player
and the TV.