Invacare Spyder Parts Catalog page 41

When ordering a Spoke Wheel with Handrim attached, the standard rim mounting process uses the
outside holes of the handrim mounting tabs. To use the inside mounting holes to reduce the overall width
of the chair, you must order the wheel and handrim assembled as a special order.
Wheel Style Tire Type
26HPS Primo
Primo
SPIN26
See Note(s) A
NOTE: A - As of 7/15/02 Spinergy Wheels now have 18 spokes instead of 30. For chairs built Before 7/15/02, it is recommended when one
wheel is requested that the wheels be replaced in pairs.
B - As of 11/8/02 these wheels now have a Black finish. For chairs built Before 11/8/02, it is recommended when one wheel is
requested that the wheels be replaced in pairs.
C - As of 11/17/08 Spinergy Wheels changed from black spoke, black hub to a black spoke, silver hub appearance. For chairs built
Before 11/17/08, it is recommended when one wheel is requested that the wheels be replaced in pairs.
When ordering a Spoke Wheel with Handrim attached, the standard rim mounting process uses the outside holes of the handrim mounting
tabs. To use the inside mounting holes to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special
order.
Form No. 00-87
Spoke Rear Wheels (w/ Handrims)
Anodized
Aluminum
Wheel
Assembly
1115639
See Note(s) B
1112344
See Note(s) C, A
To order call toll free 1-800-333-6900, or www.invacare.com
(After 9/1/11)
Grey
Plastic Coated Plastic Coated
1115640
1049559-NLA
See Note(s) B
N/A
40
Black 8 Vertical
Projection
1115445
See Note(s) B
N/A N/A
8 Oblique
Projection
N/A
N/A