Selecting Additional Options; Starting A Programme; After Drying - Miele T 699 C Operating Instructions Manual

How to dry correctly
3

Selecting additional options

One or more additional options can
now be switched on or off.
If required, the delay start option can
be selected.
See the "Additional options" and "Delay
start" sections for further information.
4

Starting a programme

Press the "START" touch pad.
The drying stage reached display will
indicate which drying stage the pro-
gramme has reached.
The memory function:
If the memory function has been acti-
vated, the machine will automatically
call up the additional options selected
for the previous programme. The indi-
cator lights will indicate which options
are selected and, if using timed drying,
the programme length selected last
time will appear in the display. For fur-
ther details on the memory function,
please see the section "Programmable
functions".
"Clean out airways" indicator light
This indicator light shows that the dryer
is not working most efficiently or econ-
omically.
The causes of this check message can
be:
– the fluff filters in the door and the
door opening are blocked;
– the condenser unit is blocked.
14

After drying

When the drying programme has fin-
ished the "Anti-crease" sequence indi-
cator light comes on.
Press the "Door" button to open the
door.
Remove the laundry.
Make sure that the drum is empty.
If items are left in the dryer, they
could be damaged by overdrying
when the dryer is next used.
After every cycle remove the fluff
from
– the fluff filter in the door
– the filters in the door opening
(See the section on "Cleaning and
care").
Empty the condensed water con-
tainer (where there is no external
drainage of the water). See the sec-
tion on "Cleaning and care".
Close the door and switch off the ma-
chine after each use.
Press the "l-On / 0-Off" button to
switch off.