Filling With Salt - Zanussi DE 4744 Instruction Book

Filling with salt

Only use salt specifically designed for use
in dishwashers.
All other types of salt not specifically
designed for use in a dishwasher,
especially table salt, will damage the water
softener.
Only fill with salt just before starting one
of the complete washing programmes.
This will prevent any grains of salt or salty
water, which may have been spilled,
remaining on the bottom of the machine
for any period of time, which may cause
corrosion.
To fill:
1. To fill with salt, unscrew the cap of the salt
container.
2. Pour 1 litre of water inside the container (this
is necessary only before filling with salt for
the first time).
3. Using the funnel provided, pour in the salt until
the container is full.
Do not worry if water over flows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the gasket.
5. Screw on the cap tightly.
The salt container will require topping up
periodically.
You are reminded of this by the salt indicator light on
the control panel which comes on when the salt has
finished.
The salt indicator light on the control
panel can remain illuminated for 2-6 hours
after the salt has been replenished,
assuming the dishwasher remains
switched on. If you are using salts that
take longer to dissolve then this can take
longer. The function of the machine is not
affected.
SR06
8