Controlling The Wheelchair Using The Remote - Invacare Electric wheelchair Operating Manual

7.6

Controlling the wheelchair using the remote

Switch on the remote (ON/OFF button). The displays on the remote will illuminate. The
wheelchair is ready to drive.
Set the drive level ("drive level" button see "Layout of the remote" on page 34).
Speed stage 1 (slow) to 5 (fast) is shown on the drive level display.
Can the electronic system programming be adapted?
The electronic controller is programmed with standard values during manufacture. Your
Invacare® dealer can carry out programming tailored to fit your requirements.
Will the wheelchair not drive after switching on?
Check the drive-away lock (see chapter "Activating / deactivating the immobilizer " on page
38) and the status bar indicator (see chapter "ON/OFF diode (status display)" on page 37.).
40