Buttons For Ambition™ 1.5 Machine - Pfaff Ambition line Owner's Manual

1
2
3
4
5
6
7
Buttons for ambition™ 1.5 machine
Needle up/down with indicator (1)
Press this button to move the needle up or down.
The setting of the needle stop position is changed
at the same time. The indicator is lit when needle
down is activated.
You can also tap the foot control to raise or lower
the needle.
Stitch restart (2)
If you stop sewing in the middle of the stitch, press
stitch restart to start sewing at the beginning of
the stitch again without having to reset any special
settings you have made.
If you press the stitch restart button while you are
actively sewing, the stitch will be fi nished and the
machine will then stop.
Immediate tie-off (3)
Press the tie-off button while sewing and your
machine sews a few tie-off stitches and stops
automatically.
Speed control lever (4)
The speed control lever sets the maximum sewing
speed. To increase sewing speed, slide the lever to
the right, to decrease sewing speed, slide the lever
to the left.
Start/stop (5)
Press this button to start or stop the machine
without using the foot control. Press the button
once to start and press it again to stop.
2:10
9
8
17
15
14
16
18 19
17
15
14
16
23
24 25
Reverse (6) with indicator (7)
For permanent reverse, press the button before
starting to sew. The reverse indicator (6) will be lit
and the machine sews in reverse until you press
the button again to cancel.
If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
button pressed. The reverse indicator is lit when
the reverse button is pressed.
Reverse is also used when sewing buttonholes,
programmed tie-off end and darning stitches to
step between the parts of the stitch.
Programmed tie-off (6) with indicator (8)
The programmed tie-off indicator is lit to indicate
that one or several tie-off options are activated. The
indicator stays lit until the tie-off options are no
longer in use.
10
22
20 21
12
11
11
13
12