Operating Your Unit - Alen BreatheSmart FIT50 User Manual

USING YoUR AIR PURIfIER

operating your unit:

1. Plug your air purifier into a grounded outlet.
2. Press Power Button in the center to start the air purifier. When your unit is on, the
lights will light up. To turn off the lights on your unit, press the
off the air purifier, press the
3. The Colored Light around the
by the particle sensor.
Color
Blue
Yellow
Red
4. Press ION to activate the ozone safe ionizer. Activation of ION enhances your unit's ability
to remove airborne particles (similar to the way dust is attracted to a TV screen). Press
ION again to turn off.
5. FILTER Indicator — The Filter indicator has 3 lights: Green, Yellow and Red. The Green
light will be illuminated for most of the life of the filter. The Yellow light will come on shortly
before your filter should be replaced. This is the ideal time to order a new filter. The Red
light will be illuminated when it is time to replace the filter.
6. After changing the filter, hold the FILTER button down for 5 seconds. The Red light will
be reset to Green.
7. Press TIMER to have the air purifier run for a set amount of hours (either 2, 4 or 12)
before turning off.
8. Press SPEED and watch the indicator lights until desired fan speed is achieved. Most
users prefer to use the air purifier on speed 2 or 3 to balance cleaning speed and noise. If
you suspect the air is particularly dirty, you should set the speed to T (Turbo).
9. Press AUTO to set the unit on Automatic Mode. Automatic Mode will use the SmartSen-
sor Technology to adjust the speed of the unit depending on the amount of particles
present in the air.
10. Press and Hold LOCK for 3 seconds to Lock/Unlock the Control Panel.
Power Button again after the lights have turned off.
Power Button indicates the air quality being measured
Meaning
Low quantity of airborne particles detected
Moderate quantity of airborne particles detected
Significant quantity of airborne particles detected
www.AlenCorp.com 1-800-630-2396
Power Button. To turn
5