Topfield TF 5200 PVRc User Manual page 60

54 Recording and Playing Back
2.
3.
4.
5.
6.
7.
In addition, you can copy a recording file in whole or in part
when playing back it.
1.
2.
3.
4.
button. The outer circle of the copying symbol indicates
progress rate.
NOTE
Press button to display a progress bar.
Find one end position of a block you want to specify
with button or
Press button at the position, then the pointer starts
to blink.
Find the other end postion.
Press button at the position again, then a confirma-
tion box appears.
Select the Save command, then the block is stored. The
stored file will named after its source file with a suffix of
'CUT' and a number
Start playback of a recording file you want.
Find a desired position from which a copy will be started
with button or
Press button.
Pressing button stops copying. The copied file will
be named after its source file with a suffix of 'COPY' and
a number.
Once a copy is started, a copying symbol like the
next figure will be displayed on the right top of the
screen for a few seconds. To see copying status, press
If copying time is less than about 1 minute, the copy-
ing will not be done successfully. It is recommended
not to change the playback speed.
button.
button.