Stompbox Encoder; Options On The Instrument/Stompbox Encoder - Peavey VIP 1 Operating Manual

Variable instrument performance amplifier
Hide thumbs Also See for VIP 1:
Table of Contents

Advertisement

Stompbox Encoder

VIP 1
VIP 2
The first encoder to the right of the input jack is the Instrument/Stompbox encoder. This control selects
the Instrument model or Stompbox (Traditional floor effects unit) which is exactly like connecting your
guitar to your favorite pedal and then into your amplifier. With the Instrument/Stompbox encoder you can
select several unique instrument models, as well as distortion and boost pedals. Combine these with the
various amp channel settings and you can get some pretty amazing tones. Simply turn the Instrument/
Stompbox encoder to select the effect you desire. If you want to adjust the parameters, simply press
the encoder to enter Edit mode (See Edit mode in Quick Start Guide). Refer to the VIP Matrix to see what
stompboxes, instruments and effects are on each model.

OptIONS ON tHE INStrumENt/StOmpbOx ENCODEr:

12 StrING*: Simulation of an electric 12 string guitar with a small body. P1: Body (fullness) P2: String
(brightness)
7 StrING*: Lowers the pitch by 5 half-steps to simulate a 7 string guitar. P1: Body, P2: String
aCOuStIC 1: Bright acoustic guitar with a small body. P1: Body, P2: String
aCOuStIC 2*: Jumbo dreadnought acoustic guitar with a deep body. P1: Body, P2: String
barItONE* Tunes the instrument down to low A, simulating a Baritone guitar. P1: Body, P2: String
baSS: monophonic model that tunes the instrument down an entire octave, simulating a Bass guitar. P1:
Body, P2: String
EVIO*: monophonic Electric Violin simulation. P1: Color, P2: Glide (higher settings will glide between
notes).
rESONatOr*: Simulation of a Resonator guitar, commonly used in Blues and Country music. Try different
settings on your guitar with the pickup selection and tone control to achieve the most realism with your
instrument. P1: Body, P2: String.
SItar*: Simulation of the traditional instrument used in Indian music. P1: Body, P2: String.
* Not available on VIp1
NOtE: mONOpHONIC mODELS arE mEaNt tO bE pLayED ONE NOtE at a tImE FOr bESt rESuLtS.
tSC: Classic overdrive distortion with just a touch of mid boost. Great in front of almost any amp model.
Try it in front of a clean TWN for starters. Parameter Adjustment: P1 Drive, P2 Level
aNaLOG bOOSt: One of the most useful effects, the boost offers a clean level boost which you will find
handy when you want to do a solo with a clean sound or if you need a boost when playing a heavy solo.
®
This will be useful when you have the optional Sanpera
I or II pedal, where using this effect will give you
a solo boost in "manual mode". Refer to the Sanpera manual for more information. P1 Drive, P2 Level
SLap: A very quick, short repetition of the original note, sounds like the note "slaps" back at you. This
effect is great for playing country music. Parameter Adjustments: P1 Time, P2 Mix

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vip3Vypyr vip seriesVypyr vip 2

Table of Contents