Subscribe to Our Youtube Channel
Related Manuals for switel D6005
Summary of Contents for switel D6005
- Page 1 Schnurlos Telefon D6005 Téléphone sans fil Telefono senza fili Cordless telephone Bedienungsanleitung Mode d’emploi Istruzioni per l'uso Operating Instructions...
-
Page 2: Table Of Contents
- Contents - General Information ................46 User controls ..................47 Setting up....................48 Safety Information....................48 Check contents of pack..................48 Connecting the base station ................48 Fitting standard batteries ..................48 Charging the standard batteries................49 Operation ....................50 Receiving calls ....................50 Making calls ...................... -
Page 3: General Information
- General Information - General Information Standard rechargeable batteries - do not use any other rechargeable batteries or battery packs. These could possibly cause a short circuit. When changing batteries, always use standard batteries, Type AAA 1.2V 650mA. Do not throw standard batteries into the fire or immerse in water. Do not dispose of old or defective standard batteries with the normal household waste. -
Page 4: User Controls
- User controls - User controls "R" Signal button/Delete Call button Redial/Pause/ Selection button forwards Keypad lock Phone book/ Selection button back Start programming/ Internal calls Paging button. Charge monitoring lamp Call indicator... -
Page 5: Setting Up
- Setting up - Setting up Safety Information WARNING! Before setting-up, it is essential that you read the General Information at the beginning of this manual. Check contents of pack The following items are supplied: one base station with foot support one mains power supply one handset two standard batteries... -
Page 6: Charging The Standard Batteries
- Setting up - Charging the standard batteries The standard rechargeable batteries for the handset have a stand-by time of max. 100 hours at room temperature and a maximum talk time of 10 hours. To charge the batteries, place the handset in the base station with the display to the front. The handset will be charged in rapid charge mode for the first 30 minutes. -
Page 7: Operation
- Operation - Operation Receiving calls When an incoming call arrives, the ringing tone sounds on the handset. The EXT symbol will flash in the display. Press the call button on the handset and the connection will be made. The call will be automatically taken as soon as you lift the handset from the base station. -
Page 8: Muting The Microphone
- Operation - Muting the microphone In this way, you will be able to speak without the other person hearing you. Switching off the microphone: Press the buttons one after the other. symbol will appear in the display. Switching on the microphone again: Press the buttons again and you will be able to continue speaking to the other party. -
Page 9: Inserting An Automatic Pause
- Operation - 4.11 Inserting an automatic pause With some private exchanges, it is necessary to dial a certain number (e.g. "9" or "0") in order, after a short pause, to obtain a dialling tone for an outside line on the extension. An automatic dialling pause of ca. -
Page 10: The Phone Book
- The phone book - The phone book You can store 10 phone numbers, each with 25 digits, in the phone book of your handset. The numbers 1 to 9 and 0 serve as memory locations and these numbers are also used later to call the stored phone numbers. -
Page 11: Special Functions
- Special functions - Special functions 6.1 Setting ring tone and ringer volume 9 different tunes are available on the handset as ring tones. The ringer volume can be adjusted in three steps. The ring tone can also be switched off completely. PROGRAMMING STEPS DISPLAY 1-STORE MEM... -
Page 12: Switching The Button Click On Or Off
- Special functions - 6.3 Switching the button click on or off Each time a button on the handset is pressed, this is confirmed with a short signal tone (button click). PROGRAMMING STEPS DISPLAY 1-STORE MEM Press the button. BEEP OFF or Press the button. -
Page 13: Touch-Tone (Ttd) Or Pulse (Pd) Dialling
- Special functions - Touch-tone (TTD) or pulse (PD) dialling This feature enables you to use your telephone both on analogue exchanges (PD) and on the new digital exchanges (TTD). The factory setting is TONE dialling. PROGRAMMING STEPS DISPLAY 1-STORE MEM Press the button. -
Page 14: Multiple Handsets
- Multiple handsets - Multiple handsets One additional handset can be logged onto the base station. This additional handset can be obtained from your dealer with the designation D6005A. When you use multiple handsets you will have the following options: Internal calls between handsets. -
Page 15: Troubleshooting
- Troubleshooting - Troubleshooting If you have problems with your telephone, please check the following points first. For any claims under the warranty, please refer to your dealer. The warranty period is 2 years and 1 year for the rechargeable batteries. o The telephone line is not correctly connected or is faulty. -
Page 16: Declaration Of Conformity
Copies of this document will be held on file for a period of 10 years after the last production. Supplier: TELGO AG, Route d'Englisberg 17, CH-1763 Granges Paccot Product: SWITEL D6005 CE0681 This product is intended for connection to analogue PSTN lines within Switzerland. - Page 17 www.switel.com...
Need help?
Do you have a question about the D6005 and is the answer not in the manual?
Questions and answers