Operation - Radio Shack FM Stereo Owner's Manual

12-2051a.fm Page 5 Wednesday, March 22, 2000 1:37 PM

OPERATION

With the transmitter connected to a CD player, you can hear the
CD player's output sound from any FM radio or receiver.
1. Slide to
POWER ON
2. Extend the wire antenna to its full length for better transmis-
sion.
3. Turn on the receiver and the CD player.
4. Refer to the table below and set the transmitter's two fre-
quency switches to the frequency you want to use.
Frequency
Switch 1 (S1)
Frequency
88.9 MHz
89.1 MHz
106.9 MHz
106.7 MHz
5. Tune the radio or receiver to the same frequency you chose
in Step 4. You hear the CD player through the receiver. Try
to turn on the transmitter.
Frequency
Switch 2 (S2)
Switch 1 (S1) Switch 2 (S2)
F1 (Left) Lo (Left)
F2 (Right) Lo (Left)
F2 (Right) Hi (Right)
F1 (Left) Hi (Right)
5