Wiring Tips - Behringer ULTRACOUSTIC AT108 User Manual

5
ULTRACOUSTIC AT108 User Manual

2. Wiring Tips

Fig. 2.1 and 2.2 show you how to connect your guitar and your microphone to
the amplifier.
If you want to use an effects pedal (for example, the BEHRINGER X V-AMP)
to experiment with some out-of-theordinary sounds, you can connect your guitar
directly to the input of the effects processor. Then, connect a second cable from
the effects output to the input on your amp.
If you have an electronic tuner, please be sure to insert it pre effects device,
so that the tuner only receives a dry signal without effects components.
X V-AMP: no additional tuner required.
◊
The built-in loudspeaker is disabled automatically when you
plug in the headphones ( 9 ) .Fig. 2.1: Setup example using the
ULTRACOUSTIC AT108
ADJUST
1
Output
2
3
4
GAIN / VOLUME
COPY 2 ND FUNCTION
CONFIGURE PEDAL
BASS EQ PRESENCE
BYPASS/TUNER
X V-AMP
Input
Instrument
input
Acoustic guitar
Mic input
BEHRINGER ULTRATONE AT108
Microphone
Fig. 2.1: Setup example using the ULTRACOUSTIC AT108
CD player
HPS3000
CD input
Headphone
Fig. 2.2 shows a recommended setup for amplifying the sound of your AT108
using a sound reinforcement system of any size. This way, you can also use your
amp for playing live or for rehearsals with your band.
EUROLIVE B1520 PRO
ADJUST
1
Output
2
3
4
GAIN / VOLUME
COPY 2 ND FUNCTION
CONFIGURE PEDAL
BASS EQ PRESENCE
BYPASS/TUNER
X V-AMP
Input
Instrument
input
Acoustic guitar
BEHRINGER ULTRATONE AT108
Fig. 2.2: Live setup
EP2000
Main
Outputs
XENYX 2222FX
Headphone