IDEAL Heat Elite Pro Operating Manual page 25

4. Work in one room at a time. Furnishings should be removed or placed in
the center of the room and covered. Work areas should be sealed off
from the rest of the dwelling by sealing doorways with drop cloths.
5. Children, pregnant or potentially pregnant women and nursing mothers
should not be present in the work area until the work is done and all
clean up is complete.
6. Wear dust respirator mask or a dual filter (dust and fume) respirator mask
which has been approved by the Occupational Safety and Health
Administration (OSHA), the National Institute of Safety and Health
(NIOSH), or the United States Bureau of Mines. These masks and replaceable
filters are readily available at major hardware stores. Be sure the mask
fits. Beards and facial hair may keep masks from sealing properly. Change
filters often. DISPOSABLE PAPER MASKS ARE NOT ADEQUATE.
7. Use caution when operating the heat gun. Keep the heat gun moving as
excessive heat will generate fumes which can be inhaled by the operator.
8. Keep food and drink out of the work area. Wash hands, arms and face
and rinse mouth before eating or drinking. Do not smoke or chew gum or
tobacco in the work area.
9. Clean up all removed paint and dust by wet mopping the floors. Use a
wet cloth to clean all walls, sills and any other surface where paint or
dust is clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phos-
phate detergent or trisodium phosphate (TSP) to wash and mop areas.
10. At the end of each work session put the paint chips and debris in a
double plastic bag, close it with tape or twist ties and dispose of properly.
11. Remove protective clothing and work shoes in the work area to avoid
carrying dust into the rest to the dwelling. Wash work clothes separately.
Wipe shoes off with a wet rag that is then washed with the work clothes.
Wash hair and body thoroughly with soap and water.
IDEAL INDUSTRIES, INC.
Becker Place
Sycamore, IL 60178, U.S.A.
800-435-0705 Customer Assistance
www. idealindustries.com
ND 4482-1
SAVE THESE INSTRUCTIONS
Heat Elite Pro
Ident Nr. 900.614
15.03.2004/27.06.2004